No. It was the damn folder level. I had everything AMA'd in within 10 seconds of posting.
Let my stupidity be a lesson to you all: CHECK THE FOLDER LEVEL FIRST. Each camera manufacturer has a different "level" of folder above the raw clips that are the actual "essence" of the media. This is usually only an issue if you transfer the media from the card to another drive (like most people do). Usually you want to point at the card itself to do the import, so if you move the media to another drive, you should put the main folder INTO ANOTHER FOLDER. Then point to that level. (as a general rule of thumb).
Steve
On Jan 18, 2014, at 10:27 PM, Greg Huson <Greg@SecretHQ.com> wrote:
> I think you also need the MXF plug-in installed along with the Canon plug... but isn't that installed by the MC Installer?
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)
<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
http://info.yahoo.com/legal/us/yahoo/utos/terms/
Saturday, January 18, 2014
Re: [Avid-L2] Canon C300 AMA?
I think you also need the MXF plug-in installed along with the Canon plug... but isn't that installed by the MC Installer?
Worth checking.
gh
----------------------------------------------------
Greg Huson
Secret Headquarters, Inc
Post Production / Production
Culver City, CA
323 677 2092
www.DigitalServiceStation.com
greg (at) SecretHQ.com
www.SecretHQ.com
On Jan 18, 2014, at 5:46 PM, Steve Hullfish <steve4lists@veralith.com> wrote:
> I tried to install the other ones and I'm not getting any love from 7.0... operator error I guess.
>
>
> I'll keep trying if there's hope.
>
> Steve
>
> On Jan 18, 2014, at 7:42 PM, Dom Q. Silverio <domqsilverio@gmail.com> wrote:
>
>>
>> Same AMA plugin
>>
>
>
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)
<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
http://info.yahoo.com/legal/us/yahoo/utos/terms/
Worth checking.
gh
----------------------------------------------------
Greg Huson
Secret Headquarters, Inc
Post Production / Production
Culver City, CA
323 677 2092
www.DigitalServiceStation.com
greg (at) SecretHQ.com
www.SecretHQ.com
On Jan 18, 2014, at 5:46 PM, Steve Hullfish <steve4lists@veralith.com> wrote:
> I tried to install the other ones and I'm not getting any love from 7.0... operator error I guess.
>
>
> I'll keep trying if there's hope.
>
> Steve
>
> On Jan 18, 2014, at 7:42 PM, Dom Q. Silverio <domqsilverio@gmail.com> wrote:
>
>>
>> Same AMA plugin
>>
>
>
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)
<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
http://info.yahoo.com/legal/us/yahoo/utos/terms/
Re: [Avid-L2] Canon C300 AMA?
I tried to install the other ones and I'm not getting any love from 7.0... operator error I guess.
I'll keep trying if there's hope.
Steve
__._,_.___
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (4) |
.
__,_._,___
Re: [Avid-L2] Canon C300 AMA?
Aren't they all the same? 2.0.3 plugins.
On Sat, Jan 18, 2014 at 5:40 PM, Steve Hullfish <steve4lists@veralith.com> wrote:
I swear we've been over this ground.
I switched from MC6.5 to MC7 and I can't seem to find an AMA plugin for C300 for it.
Tried the Canon site, of course. Seems like there are plugins for the XF300 family.
Thoughts? Use some other software to do the transfer?
MXFTransfer from our friend VideoToolShed?
Steve
__._,_.___
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (3) |
.
__,_._,___
Re: [Avid-L2] Canon C300 AMA?
Same AMA plugin
Canon XF AMA v 2.03
On 1/18/2014 8:40 PM, Steve Hullfish wrote:
> I swear we've been over this ground.
>
> I switched from MC6.5 to MC7 and I can't seem to find an AMA plugin for C300 for it.
>
> Tried the Canon site, of course. Seems like there are plugins for the XF300 family.
>
> Thoughts? Use some other software to do the transfer?
>
> MXFTransfer from our friend VideoToolShed?
>
> Steve
>
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>
>
__._,_.___
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (2) |
.
__,_._,___
[Avid-L2] Canon C300 AMA?
I swear we've been over this ground.
I switched from MC6.5 to MC7 and I can't seem to find an AMA plugin for C300 for it.
Tried the Canon site, of course. Seems like there are plugins for the XF300 family.
Thoughts? Use some other software to do the transfer?
MXFTransfer from our friend VideoToolShed?
Steve
__._,_.___
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (1) |
.
__,_._,___
Re: [Avid-L2] Simplist 23.98 to 59.94i workflow?
I did not know D... had universal mastering
BG
From: Tony Quinsee-Jover <tony@hdheaven.co.uk>
To: "Avid-L2@yahoogroups.com" <Avid-L2@yahoogroups.com>
Sent: Saturday, January 18, 2014 2:45 PM
Subject: Re: [Avid-L2] Simplist 23.98 to 59.94i workflow?
> On 17 Jan 2014, at 18:45, Bogdan Grigorescu <bogdan_grigorescu@yahoo.com> wrote:
>
> and maybe Avid can make it work in RGB444
That would be D...
>
> and maybe Avid can make it work in RGB444
That would be D...
__._,_.___
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (20) |
.
__,_._,___
Re: [Avid-L2] Simplist 23.98 to 59.94i workflow?
> On 17 Jan 2014, at 18:45, Bogdan Grigorescu <bogdan_grigorescu@yahoo.com> wrote:
>
> and maybe Avid can make it work in RGB444
That would be D...
__._,_.___
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (19) |
.
__,_._,___
[Avid-L2] Paramount digital distribution only
http://www.latimes.com/entertainment/envelope/cotown/la-et-ct-paramount-digital-20140117,0,5245137.story#axzz2qkVGRYiA
__._,_.___
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (1) |
.
__,_._,___
[Avid-L2] Bug? No Audio data on track 24?
Just noticed that on my Mac Symph 7.0.3 the data display on track 24
doesn't seem to be working on my system.
Turned on audio for all tracks. Moved audio between 24 and another track
where it displayed, and then back again 24 where it didn't.
Can anyone confirm that it is a bug?
__._,_.___
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (1) |
.
__,_._,___
Re: [Avid-L2] AVID FREEZES
Hi,
Sorry if someone already mentioned this. You could create a new project and import the bins from the old project. See if the new project crashes opening up.
Best Wishes,
Paul
From: "Roger Shufflebottom" <rogershuff@yahoo.co.uk>
To: Avid-L2@yahoogroups.com
Sent: Saturday, January 18, 2014 8:31:52 AM
Subject: Re: [Avid-L2] AVID FREEZES
Sorry if someone already mentioned this. You could create a new project and import the bins from the old project. See if the new project crashes opening up.
Best Wishes,
Paul
From: "Roger Shufflebottom" <rogershuff@yahoo.co.uk>
To: Avid-L2@yahoogroups.com
Sent: Saturday, January 18, 2014 8:31:52 AM
Subject: Re: [Avid-L2] AVID FREEZES
And if you open a bin from the Attic, COPY it somewhere first (out of the Attic), just in case you corrupt that one, too.
+44 7973 543660
On 18 Jan 2014, at 12:52, Steve Hullfish <steve4lists@veralith.com> wrote:
Another thing to try - and I can't remember the exact keystrokes, but you can google it - is that you can launch a formerly open Avid project with all of the bins that had been opened CLOSED. The problem is probably not Media Composer, but possibly a corrupt bin or sequence. So if you can launch your project with all the bins closed, then you'd at least have an open project.
Another faster thing would be to NOT open that project at all. Open a NEW project and then attempt to open a bin from the Attic from the "corrupt" project into that new project. Keep going back to older and older versions of the bin that has the sequence in it until you find one that will open.SteveOn Jan 18, 2014, at 5:18 AM, Roger Shufflebottom <rogershuff@yahoo.co.uk> wrote:More details would be helpful. Version? PC? Mac? Any hardware attached? Have you tried creating a new project with a new user profile and see if it launches? Try trashing the MCState foe (Media Composer folder>Settings folder.
+44 7973 543660On 18 Jan 2014, at 00:39, bakertv1945 <bakertv1945@yahoo.com> wrote:Help! I am in the middle of a project. When I try to open Media Composer it gets as far as loading Sequence and Freezes. This happens on old sequences from Avid Projects any thing. I tried reinstalling same thing. But I get a error 1308 can not find files on some of the avid files I hit ignor and it keeps loading. When I open freezes on sequence it goes through settings and then all the bin windows sit there white. Thank You
__._,_.___
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (6) |
.
__,_._,___
Re: [Avid-L2] AVID FREEZES
And if you open a bin from the Attic, COPY it somewhere first (out of the Attic), just in case you corrupt that one, too.
+44 7973 543660
On 18 Jan 2014, at 12:52, Steve Hullfish <steve4lists@veralith.com> wrote:
Another thing to try - and I can't remember the exact keystrokes, but you can google it - is that you can launch a formerly open Avid project with all of the bins that had been opened CLOSED. The problem is probably not Media Composer, but possibly a corrupt bin or sequence. So if you can launch your project with all the bins closed, then you'd at least have an open project.
Another faster thing would be to NOT open that project at all. Open a NEW project and then attempt to open a bin from the Attic from the "corrupt" project into that new project. Keep going back to older and older versions of the bin that has the sequence in it until you find one that will open.SteveOn Jan 18, 2014, at 5:18 AM, Roger Shufflebottom <rogershuff@yahoo.co.uk> wrote:More details would be helpful. Version? PC? Mac? Any hardware attached? Have you tried creating a new project with a new user profile and see if it launches? Try trashing the MCState foe (Media Composer folder>Settings folder.
+44 7973 543660On 18 Jan 2014, at 00:39, bakertv1945 <bakertv1945@yahoo.com> wrote:Help! I am in the middle of a project. When I try to open Media Composer it gets as far as loading Sequence and Freezes. This happens on old sequences from Avid Projects any thing. I tried reinstalling same thing. But I get a error 1308 can not find files on some of the avid files I hit ignor and it keeps loading. When I open freezes on sequence it goes through settings and then all the bin windows sit there white. Thank You
__._,_.___
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (5) |
.
__,_._,___
Re: [Avid-L2] AVID FREEZES
To open an existing project with all bins and tools closed, hold down Option/Alt as you select the project.
+44 7973 543660
On 18 Jan 2014, at 12:52, Steve Hullfish <steve4lists@veralith.com> wrote:
Another thing to try - and I can't remember the exact keystrokes, but you can google it - is that you can launch a formerly open Avid project with all of the bins that had been opened CLOSED. The problem is probably not Media Composer, but possibly a corrupt bin or sequence. So if you can launch your project with all the bins closed, then you'd at least have an open project.
Another faster thing would be to NOT open that project at all. Open a NEW project and then attempt to open a bin from the Attic from the "corrupt" project into that new project. Keep going back to older and older versions of the bin that has the sequence in it until you find one that will open.SteveOn Jan 18, 2014, at 5:18 AM, Roger Shufflebottom <rogershuff@yahoo.co.uk> wrote:More details would be helpful. Version? PC? Mac? Any hardware attached? Have you tried creating a new project with a new user profile and see if it launches? Try trashing the MCState foe (Media Composer folder>Settings folder.
+44 7973 543660On 18 Jan 2014, at 00:39, bakertv1945 <bakertv1945@yahoo.com> wrote:Help! I am in the middle of a project. When I try to open Media Composer it gets as far as loading Sequence and Freezes. This happens on old sequences from Avid Projects any thing. I tried reinstalling same thing. But I get a error 1308 can not find files on some of the avid files I hit ignor and it keeps loading. When I open freezes on sequence it goes through settings and then all the bin windows sit there white. Thank You
__._,_.___
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (4) |
.
__,_._,___
Re: [Avid-L2] AVID FREEZES
Another thing to try - and I can't remember the exact keystrokes, but you can google it - is that you can launch a formerly open Avid project with all of the bins that had been opened CLOSED. The problem is probably not Media Composer, but possibly a corrupt bin or sequence. So if you can launch your project with all the bins closed, then you'd at least have an open project.
Another faster thing would be to NOT open that project at all. Open a NEW project and then attempt to open a bin from the Attic from the "corrupt" project into that new project. Keep going back to older and older versions of the bin that has the sequence in it until you find one that will open.
Steve
On Jan 18, 2014, at 5:18 AM, Roger Shufflebottom <rogershuff@yahoo.co.uk> wrote:
More details would be helpful. Version? PC? Mac? Any hardware attached? Have you tried creating a new project with a new user profile and see if it launches? Try trashing the MCState foe (Media Composer folder>Settings folder.
+44 7973 543660On 18 Jan 2014, at 00:39, bakertv1945 <bakertv1945@yahoo.com> wrote:Help! I am in the middle of a project. When I try to open Media Composer it gets as far as loading Sequence and Freezes. This happens on old sequences from Avid Projects any thing. I tried reinstalling same thing. But I get a error 1308 can not find files on some of the avid files I hit ignor and it keeps loading. When I open freezes on sequence it goes through settings and then all the bin windows sit there white. Thank You
__._,_.___
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (3) |
.
__,_._,___
Re: [Avid-L2] AVID FREEZES
More details would be helpful. Version? PC? Mac? Any hardware attached? Have you tried creating a new project with a new user profile and see if it launches? Try trashing the MCState foe (Media Composer folder>Settings folder.
+44 7973 543660
On 18 Jan 2014, at 00:39, bakertv1945 <bakertv1945@yahoo.com> wrote:
Help! I am in the middle of a project. When I try to open Media Composer it gets as far as loading Sequence and Freezes. This happens on old sequences from Avid Projects any thing. I tried reinstalling same thing. But I get a error 1308 can not find files on some of the avid files I hit ignor and it keeps loading. When I open freezes on sequence it goes through settings and then all the bin windows sit there white. Thank You
__._,_.___
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (2) |
.
__,_._,___
Subscribe to:
Posts (Atom)
