Saturday, May 18, 2013

[Avid-L2] Re: SSD recommendations

 

For the record, this is the reason I suggested possibly considering an HP-blessed system drive (if it is a new and fast 6G drive):

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=125&prodSeriesId=3718645&prodTypeId=12454&objectID=c02711513

or this shorter link:

http://tinyurl.com/a37qog9

--- In Avid-L2@yahoogroups.com, "blafarm" <blafarm@...> wrote:
>
> I would strongly recommend only buying a SSD intended for a System drive from HP. The tolerances are quite critical in HP's Workstations.
>
> I have personally tried several high-end SSD drives that could not be mounted as either the System drive -- or even as D, E, F -- in my Z800.
>
> And that incompatibility experience has been perfectly replicated in my new Z820.
>
> For the record, the HP SSD drives come with a 3.5 to 2.5 carrier.
>
> Your search for an HP-blessed SSD might start on this page:
> http://h18000.www1.hp.com/products/quickspecs/13379_na/13379_na.HTML
>
> And, the part number for the carrier alone is 675769-001, which you can find here:
> http://partsurfer.hp.com/Search.aspx?searchText=675769-001
>
>
> Good luck.
>
>
>
>
> --- In Avid-L2@yahoogroups.com, "ksirul" <kenavid2@> wrote:
> >
> > for system drive in Z800. Whadayall like?
> >
> > KEN
> >
>

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (10)
Recent Activity:
Search the official Complete Avid-L archives at:   http://archives.bengrosser.com/avid/
.

__,_._,___

Re: [Avid-L2] OT: Marketing a Product idea?

 

If you are looking to patent before peddling it around town, try legalzoom for the least expensive way to get through the process (they have forms-based and pre-priced help from affiliated lawyers)
http://ww.legalzoom.com

 
John McClary
------------------------------
"There's Always A Solution"

________________________________
From: Gregg Foster <fieldproductions@comcast.net>
To: "Avid-L2@yahoogroups.com" <Avid-L2@yahoogroups.com>
Sent: Friday, May 17, 2013 12:26 PM
Subject: Re: [Avid-L2] OT: Marketing a Product idea?


 
John,
I can't help with a Patent Attny; but with two large dogs I might be interested in buying a tennis ball washer?

Gregg Foster
Technical Supervisor
Editor / Producer
Remote Production
www.greggrfoster.com

Sent from my iPhone

On May 17, 2013, at 3:47 AM, John Moore <bigfish@pacbell.net> wrote:

> I'm curious if anyone on the list has been involved in patenting an idea for a product. No it's not the Tennis ball washer I built for my do. I don't have any experience in this area. Anybody got experience and or suggestions for where to go with a great device that should put me on easy street. ;-) Yeah and I plan to win the lotto too.
>
> John Moore
>
> Barking Trout Productions
>
> Studio City, CA
>
> bigfish@pacbell.net
>
> [Non-text portions of this message have been removed]
>
>

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (10)
Recent Activity:
Search the official Complete Avid-L archives at:   http://archives.bengrosser.com/avid/
.

__,_._,___

Friday, May 17, 2013

[Avid-L2] Re: OT: Marketing a Product idea?

 

Drink a lot of Beer and go to the PVC section of the plumbing store with an open mind. You'll probably come up with a better design than I did. ;-)

--- In Avid-L2@yahoogroups.com, Gregg Foster <fieldproductions@...> wrote:
>
> John,
> I can't help with a Patent Attny; but with two large dogs I might be interested in buying a tennis ball washer?
>
> Gregg Foster
> Technical Supervisor
> Editor / Producer
> Remote Production
> www.greggrfoster.com
>
>
>
> Sent from my iPhone
>
> On May 17, 2013, at 3:47 AM, John Moore <bigfish@...> wrote:
>
> > I'm curious if anyone on the list has been involved in patenting an idea for a product. No it's not the Tennis ball washer I built for my do. I don't have any experience in this area. Anybody got experience and or suggestions for where to go with a great device that should put me on easy street. ;-) Yeah and I plan to win the lotto too.
> >
> > John Moore
> >
> > Barking Trout Productions
> >
> > Studio City, CA
> >
> > bigfish@...
> >
> > [Non-text portions of this message have been removed]
> >
> >
>
>
> [Non-text portions of this message have been removed]
>

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (9)
Recent Activity:
Search the official Complete Avid-L archives at:   http://archives.bengrosser.com/avid/
.

__,_._,___

Re: [Avid-L2] Re: SSD recommendations

 


Looks very much like this one:

http://www.newegg.com/Product/Product.aspx?Item=N82E16817994064

On 18 mei 2013, at 00:31, "Job ter Burg (L2B)" <Job_L2@terburg.com> wrote:

>
> I have mine in a Kensington converter box. 2.5" SSD inside a 3.5" box, which fits perfectly in the z800 tray.

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (9)
Recent Activity:
Search the official Complete Avid-L archives at:   http://archives.bengrosser.com/avid/
.

__,_._,___

Re: [Avid-L2] Re: SSD recommendations

 


I have mine in a Kensington converter box. 2.5" SSD inside a 3.5" box, which fits perfectly in the z800 tray.

On 17 mei 2013, at 17:45, "Terence Curren" <tcurren@aol.com> wrote:

> The hardest part is mounting it. The SSD drive carriers, put the drive in the middle. The Z800 carriers are designed to align a standard drive to the motherboard. I never found an SSD carrier that worked. Since I have my CPU mounted on it's side in a rack, I just have the SSD drive plugged right onto the motherboard. Far from ideal.

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (8)
Recent Activity:
Search the official Complete Avid-L archives at:   http://archives.bengrosser.com/avid/
.

__,_._,___

Re: [Avid-L2] Re: OT congraulations

 

Thanks Sue. It was truly a blessing only to be unemployed for 1 week (especially when I saw what unemployment was goilg to pay!)

Mike
Sent from my Verizon Wireless Smartphone

Susan Perla <sueperla@att.net> wrote:

>Congratulations Mike;
>Wishing you all the best on the NBC team
>very truly,
>
>Susan Perla
>
>
>
>
>
>________________________________
>From: mike cardeiro <mcardeiro@yahoo.com>
>To: "Avid-L2@yahoogroups.com" <Avid-L2@yahoogroups.com>
>Sent: Thu, May 16, 2013 9:40:41 PM
>Subject: Re: [Avid-L2] Computer eyeware? OT
>
>
>From: Dennis Degan
>>So Mike, does this mean you're officially on the team? If so,
>congratulations! (ya coulda come by my room to give me the good news!
>>That's NLE 506 Sat-Tues 3am-11am).
>
>yup I am in! thanks again I couldn't have gotten here without you. The commute
>sucks but getting a regular paycheck is a lifesaver ( sorry I didn't stop by, I
>still can't find my way around)
>
>Mike Cardeiro
>
>Avid Editor - NBC Early Today
>New York City
>
>[Non-text portions of this message have been removed]
>
>
>
>
>[Non-text portions of this message have been removed]
>

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (31)
Recent Activity:
Search the official Complete Avid-L archives at:   http://archives.bengrosser.com/avid/
.

__,_._,___

[Avid-L2] Re: SSD recommendations

 

I would strongly recommend only buying a SSD intended for a System drive from HP. The tolerances are quite critical in HP's Workstations.

I have personally tried several high-end SSD drives that could not be mounted as either the System drive -- or even as D, E, F -- in my Z800.

And that incompatibility experience has been perfectly replicated in my new Z820.

For the record, the HP SSD drives come with a 3.5 to 2.5 carrier.

Your search for an HP-blessed SSD might start on this page:
http://h18000.www1.hp.com/products/quickspecs/13379_na/13379_na.HTML

And, the part number for the carrier alone is 675769-001, which you can find here:
http://partsurfer.hp.com/Search.aspx?searchText=675769-001

Good luck.

--- In Avid-L2@yahoogroups.com, "ksirul" <kenavid2@...> wrote:
>
> for system drive in Z800. Whadayall like?
>
> KEN
>

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (7)
Recent Activity:
Search the official Complete Avid-L archives at:   http://archives.bengrosser.com/avid/
.

__,_._,___

[Avid-L2] Re: SSD recommendations

 

Hi Wilson,

My problem is those drive bays are taken up by a DVD burner, BluRay burner, and removable SATA drive mount for archiving. :-(

--- In Avid-L2@yahoogroups.com, Wilson Chao <wilsonchao@...> wrote:
>
> Terry,
>
> When you mention "the Z800 carriers" I'm assuming you mean the
> four internal bays on the bottom front, which indeed only are designed
> for standard 3.5" drives. I believe the HP-approved mount for a SSD
> is their "Hard drive carrier assembly - For inserting two SFF drives
> into optical disk drive bay 570577-001"
>
> http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=es&cc=mx&taskId=125&prodSeriesId=3718645&prodTypeId=12454&objectID=c01721583
>
> http://www.amazon.com/HP-570577-001-SPS-CARRIER-SFF-570577001/dp/B003FFYIR8
>
> This mounts a pair of "Small Form Factor" drives in one of the
> "Optical Disk Drive" bays. There are three of these ODD bays on the
> stock Z800. The top bay usually has a DVD drive, and the next two
> usually are covered with blank plastic plates.
>
> Wilson
>
>
>
>
> On Fri, May 17, 2013 at 11:45 AM, Terence Curren <tcurren@...> wrote:
> >
> >
> >
> > The hardest part is mounting it. The SSD drive carriers, put the drive in
> > the middle. The Z800 carriers are designed to align a standard drive to the
> > motherboard. I never found an SSD carrier that worked. Since I have my CPU
> > mounted on it's side in a rack, I just have the SSD drive plugged right onto
> > the motherboard. Far from ideal.
> >
> >
> >
> > --- In Avid-L2@yahoogroups.com, "ksirul" <kenavid2@> wrote:
> > >
> > > for system drive in Z800. Whadayall like?
> > >
> > > KEN
> > >
> >
> >
>

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (6)
Recent Activity:
Search the official Complete Avid-L archives at:   http://archives.bengrosser.com/avid/
.

__,_._,___

Re: [Avid-L2] SSD recommendations

 

Samsung 840 Pro or OCZ Vertex 4

DQS

On May 17, 2013, at 11:39 AM, "ksirul" <kenavid2@glueedit.com> wrote:

> for system drive in Z800. Whadayall like?
>
> KEN
>
>
>
> ------------------------------------
>
> Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
> Yahoo! Groups Links
>
>
>

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (5)
Recent Activity:
Search the official Complete Avid-L archives at:   http://archives.bengrosser.com/avid/
.

__,_._,___

Re: [Avid-L2] Re: SSD recommendations

Terry,

When you mention "the Z800 carriers" I'm assuming you mean the
four internal bays on the bottom front, which indeed only are designed
for standard 3.5" drives. I believe the HP-approved mount for a SSD
is their "Hard drive carrier assembly - For inserting two SFF drives
into optical disk drive bay 570577-001"

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=es&cc=mx&taskId=125&prodSeriesId=3718645&prodTypeId=12454&objectID=c01721583

http://www.amazon.com/HP-570577-001-SPS-CARRIER-SFF-570577001/dp/B003FFYIR8

This mounts a pair of "Small Form Factor" drives in one of the
"Optical Disk Drive" bays. There are three of these ODD bays on the
stock Z800. The top bay usually has a DVD drive, and the next two
usually are covered with blank plastic plates.

Wilson




On Fri, May 17, 2013 at 11:45 AM, Terence Curren <tcurren@aol.com> wrote:
>
>
>
> The hardest part is mounting it. The SSD drive carriers, put the drive in
> the middle. The Z800 carriers are designed to align a standard drive to the
> motherboard. I never found an SSD carrier that worked. Since I have my CPU
> mounted on it's side in a rack, I just have the SSD drive plugged right onto
> the motherboard. Far from ideal.
>
>
>
> --- In Avid-L2@yahoogroups.com, "ksirul" <kenavid2@...> wrote:
> >
> > for system drive in Z800. Whadayall like?
> >
> > KEN
> >
>
>


------------------------------------

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [Avid-L2] OT: Marketing a Product idea?

 

That should have been :) not ?

On May 17, 2013, at 12:26 PM, Gregg Foster <fieldproductions@comcast.net> wrote:

> John,
> I can't help with a Patent Attny; but with two large dogs I might be interested in buying a tennis ball washer?
>
> Gregg Foster
> Technical Supervisor
> Editor / Producer
> Remote Production
> www.greggrfoster.com
>
> Sent from my iPhone
>
> On May 17, 2013, at 3:47 AM, John Moore <bigfish@pacbell.net> wrote:
>
> > I'm curious if anyone on the list has been involved in patenting an idea for a product. No it's not the Tennis ball washer I built for my do. I don't have any experience in this area. Anybody got experience and or suggestions for where to go with a great device that should put me on easy street. ;-) Yeah and I plan to win the lotto too.
> >
> > John Moore
> >
> > Barking Trout Productions
> >
> > Studio City, CA
> >
> > bigfish@pacbell.net
> >
> > [Non-text portions of this message have been removed]
> >
> >
>
> [Non-text portions of this message have been removed]
>
>

[Non-text portions of this message have been removed]

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (8)
Recent Activity:
Search the official Complete Avid-L archives at:   http://archives.bengrosser.com/avid/
.

__,_._,___

Re: [Avid-L2] OT: Marketing a Product idea?

 

John,
I can't help with a Patent Attny; but with two large dogs I might be interested in buying a tennis ball washer?

Gregg Foster
Technical Supervisor
Editor / Producer
Remote Production
www.greggrfoster.com

Sent from my iPhone

On May 17, 2013, at 3:47 AM, John Moore <bigfish@pacbell.net> wrote:

> I'm curious if anyone on the list has been involved in patenting an idea for a product. No it's not the Tennis ball washer I built for my do. I don't have any experience in this area. Anybody got experience and or suggestions for where to go with a great device that should put me on easy street. ;-) Yeah and I plan to win the lotto too.
>
> John Moore
>
> Barking Trout Productions
>
> Studio City, CA
>
> bigfish@pacbell.net
>
> [Non-text portions of this message have been removed]
>
>

[Non-text portions of this message have been removed]

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (7)
Recent Activity:
Search the official Complete Avid-L archives at:   http://archives.bengrosser.com/avid/
.

__,_._,___

[Avid-L2] Re: SSD recommendations

 

Damnit!

--- In Avid-L2@yahoogroups.com, "Terence Curren" <tcurren@...> wrote:
>
> The hardest part is mounting it. The SSD drive carriers, put the drive in the middle. The Z800 carriers are designed to align a standard drive to the motherboard. I never found an SSD carrier that worked. Since I have my CPU mounted on it's side in a rack, I just have the SSD drive plugged right onto the motherboard. Far from ideal.
>
> --- In Avid-L2@yahoogroups.com, "ksirul" <kenavid2@> wrote:
> >
> > for system drive in Z800. Whadayall like?
> >
> > KEN
> >
>

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (3)
Recent Activity:
Search the official Complete Avid-L archives at:   http://archives.bengrosser.com/avid/
.

__,_._,___

[Avid-L2] Re: SSD recommendations

 

The hardest part is mounting it. The SSD drive carriers, put the drive in the middle. The Z800 carriers are designed to align a standard drive to the motherboard. I never found an SSD carrier that worked. Since I have my CPU mounted on it's side in a rack, I just have the SSD drive plugged right onto the motherboard. Far from ideal.

--- In Avid-L2@yahoogroups.com, "ksirul" <kenavid2@...> wrote:
>
> for system drive in Z800. Whadayall like?
>
> KEN
>

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (2)
Recent Activity:
Search the official Complete Avid-L archives at:   http://archives.bengrosser.com/avid/
.

__,_._,___
There was an error in this gadget