I forgot about I/O express working with 5.5.3. That will be my next try. I have run Version 6 successfully on 10.6.8 on my laptop and my SNDX but as I said I was using an ethernet connection manager on the SNDX mac rig not fibre. Also I have my media for sndx on SanMP so I'm not accessing media from the unity ethernet connection very often but when I do I don't get errors at least when running 5.5.3. I hope this works back revving that would be very helpful to screen in HD.
--- In Avid-L2@yahoogroups.com, Bogdan Grigorescu <bogdan_grigorescu@...> wrote:
>
> AJA i/o express is supported in MC5.5.3, so unless you really need something from v6, I would back rev. to the winning combination: 10.6.8/5.5.3/5.2
>
> Also, 6.0.3 was never qualified to work on SnowLeopard. It's Lion only. Likely part of your problems.
>
> cheers,
> BG
> www.finale.tv
>
> --- On Sat, 11/3/12, John Moore <bigfish@...> wrote:
>
> From: John Moore <bigfish@...>
> Subject: [Avid-L2] Ver. 6 and Medianet compatibility?
> To: "Avid L2" <Avid-L2@yahoogroups.com>
> Date: Saturday, November 3, 2012, 6:41 PM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Â
>
>
>
>
>
>
>
>
>
> Okay I know this is crossing the version streams but I've been running my Mac SNDX 5.5.3 with OS 10.6.8 and connection manager 5.2 over ethernet to our older unity and now our newer medianet unity with sucess. I added a new startup drive to one of our mac media composers that runs OS 10.5x with mc 3.1.1 ish. The new startup drive has media composer 6.0.3 and os 10.6.8 and it works fine with an aja i/o express. With Fibre Manager 5.3.3 and the latest 5.5.1 I can connect to our medianet unity. I can create a project but can't seem to access media on the unity. I can transfer files to the unity workspace at the finder level and I can run a project but the media is another story. I'm thinking something has changed from 5.5.3 to 6 that won't work on older unity media storage. I can store media locally on the media composer mac while running the project off unity over fibre. Is there any chance that it's because this Avid is hooked up
> fibre
>
> using fibre manager instead of ethernet using connection manager? Is it a known incompatibility with ver 6.x and older unitys? It just seems like if I can run a project and transfer files I should be able to access the media. The same system running it's normal os 10.5.x and V 3.1.1 can access the media. Our efforts are to be able to feed an HD signal to the Panny monitor over SDI so the editor can offline watching the HD signal not an SD mojo output. The AJA I/O seemed perfect up until the unity issue. I figured as long as I could connect and mount workspaces it would work but oh well. Any suggestions? I guess the other route would be a mojo DX and running an earlier version of mediacomposer.
>
>
>
> John Moore
>
>
>
> Barking Trout Productions
>
>
>
> Studio City, CA
>
>
>
> bigfish@...
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (5) |
