We aren't having that exact problem but yeah we've definitely ran into AMA
problems. We ended up laying off all of our AMA clips (before transcode)
to XD with the U1/U2 and digitizing them back in at 15:1 with the F1600's.
We are having to overcut everything that the editors give us. They haven't
been using that many of the AMA clips, but we were definitely screwed on
our first Uprez.
The after transcode, the AMA clips actually had minutes cut off from them,
but only in the video. But the amount of video that was missing from each
clip would be random for every transcode that you would do... weird shit.
On Fri, May 11, 2012 at 11:37 PM, Barnaby Levy <
barnabylevy@gmail.com>wrote:
> **
>
>
> Also suggest being very careful if you are running 6 on unity and using AMA
> to transcode material. There is an unfixed bug where the transcoded
> material will having missing frames, the clip will play until it gets
> within 10 or so frames, then an error message pops up. They thought they
> had this fixed and I am not sure if it is now, but I had to re-transcode a
> lot of material after moving over to an ISIS where the problem did not
> exist. "core consistency check failure"
>
> Barnaby
> 323.401.8642
>
>
> On Fri, May 11, 2012 at 8:16 PM, namyrb <
namyrb@gmail.com> wrote:
>
> > It's definitely not the bins being locked. That's an easy fix. We did
> > some research and it seems like our loggers have been working out of a
> > project that was created in MC 5.0.4. And every bay that was affected has
> > been used by the loggers... Will try to recreate the project in MC6 and
> see
> > if that fixes things... Thanks for the suggestions though.
> >
> > On Wed, May 9, 2012 at 7:29 AM, Pepe <
pepe.serventi@magicalelves.com>
> > wrote:
> >
> > > **
>
> > >
> > >
> > > I agree with Terrance. If one of you bays shuts down a project before
> > > closing a bin, that bay will lock the bin. When you try to open it
> again
> > in
> > > another bay you can get a file busy error. Just go in to the finder
> level
> > > and trash the lck. File on that bin.
> > >
> > > --- In
Avid-L2@yahoogroups.com, "Terence Curren" <tcurren@...> wrote:
> > > >
> > > > I'm experiencing bins getting "locked out" on Isis. Some times
> throwing
> > > out the lock file will fix it, sometimes no.
> > > >
> > > >
> > > > --- In
Avid-L2@yahoogroups.com, Jay Mahavier <jay_mahavier@> wrote:
> > > > >
> > > > > If you unmount all your media drive before launching the
> application
> > > will the bins open then? I've been having a difficult time with our
> MCv6
> > > systems and our Unity system. When I run into the bin won't open thing
> I
> > > have to go find the offending media, dump it, and recreate it. And as
> > Unity
> > > is EOL I've got little hope of this ever getting better. But if you are
> > on
> > > Isis then it will probably get fixed at some point.
> > > > >
> > > > > Jay
> > > > >
> > > > >
> > > > > On May 9, 2012, at 12:48 AM, namrbius wrote:
> > > > >
> > > > > > We're on MC 6.0.1, Isis 7000, OS X Lion 10.7.2 on 2010 Mac-Pros,
> > and
> > > a couple of Windows 7 Z400's.
> > > > > >
> > > > > > We have about 30 bays, 5 are software only, 6 are Nitris DX, and
> > the
> > > rest are using AJA IOXT's.
> > > > > >
> > > > > > So we've been having this problem for a while now where bins
> > > (usually in a specific folder) will not. Not only will they not open,
> the
> > > status bar will stop and Avid will crash, forcing a force quit every
> > time.
> > > The only thing we've been able to do to counter this is open up all of
> > the
> > > bins that aren't working on a bay that is able to open them and
> recreate
> > > them one by one. Even then, they'll sometimes stop working again. But
> we
> > > can't just keep doing this process over and over again. It takes an
> > entire
> > > night shift to recreate everything.
> > > > > >
> > > > > > We've already tried basic maintenance, site settings, user
> settings
> > > etc. We've tried reinstalling Avid, but nothing really works. We
> haven't
> > > tried reinstalling OS X, but getting a guy out here to do it (I don't
> > have
> > > the authority to do so) is difficult. We can also try the new update
> > > (6.0.1.1), but that's... a process with this many bays. The update is
> in
> > > the works.
> > > > > >
> > > > > > The only other pieces of information that I have are that it only
> > > happens on Mac Pros with the AJA boxes and its only happening on a few
> of
> > > the bays. Most of them are ok.
> > > > > >
> > > > > > Has anyone else had this problem?
> > > > > >
> > > > > >
> > > > > >
> > > > > > ------------------------------------
> > > > > >
> > > > > > Search the official Complete Avid-L archives at:
> > >
http://archives.bengrosser.com/avid/
> > > > > > Yahoo! Groups Links
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > >
> > >
> >
> >
> > [Non-text portions of this message have been removed]
>
> >
> >
> >
> > ------------------------------------
> >
> > Search the official Complete Avid-L archives at:
> >
http://archives.bengrosser.com/avid/
> > Yahoo! Groups Links
> >
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
Search the official Complete Avid-L archives at:
http://archives.bengrosser.com/avid/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)
<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
