---In Avid-L2@yahoogroups.com, <avid@...> wrote :
Thanks all. And the winner is…a null modem cable. ;-(
Didn't realize that was on there as a sex changer. Pulled out, all is well with the word.
Thanks for all the suggestions.
From: Avid-L2@yahoogroups.com <Avid-L2@yahoogroups.com>
Sent: Wednesday, September 5, 2018 12:20 PM
To: Avid-L2@yahoogroups.com
Subject: RE: [Avid-L2] Deck Control Issues
FYI ... I am running about 170 ft. with no problems.
-keoni.
On Wed, Sep 5, 2018 at 10:21, avid@... [Avid-L2]
<Avid-L2@yahoogroups.com> wrote:
It's about 75ft. It worked over a similar distance (with the same cables) previously.
From: Avid-L2@yahoogroups.com <Avid-L2@yahoogroups.com>
Sent: Wednesday, September 5, 2018 10:11 AM
To: Paul Darrigo fedguy2@... [Avid-L2] <Avid-L2@yahoogroups.com>; avid@...
Subject: Re: [Avid-L2] Deck Control Issues
What's the total distance for the 9pin?
On Sep 4, 2018, at 6:21 PM, avid@... [Avid-L2] <Avid-L2@yahoogroups..com> wrote:
Recently I helped a customer move their machine room and edit systems. It all went well, except for one system which will not do deck control – although it did before the move.
I've hooked up dozens of these over the years but I am stumped.
System is a Win7 HPz440 running Media Composer 8.4.something. I have tried 3 different USB to Serial adapters, 2 Rosetta Stone cables, temp cabling to the machine room and bypassing the machine control patch panel. I am also into a USB2 port since I have found they don't work on USB3.
So probably not hardware.
On the software side I have uninstalled and reinstalled the Keyspan software, confirming it is the same version that other working systems are using. I have also confirmed the same firmware. I have tried various virtual ports, allocated in the Keyspan software.
Any thoughts, suggestions, ideas appreciated.
- Dave
(971) 267-7661
Posted by: bigfish@pacbell.net
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (13) |
