Re: [Avid-L2] Canon C300 AMA?

No. It was the damn folder level. I had everything AMA'd in within 10 seconds of posting.

Let my stupidity be a lesson to you all: CHECK THE FOLDER LEVEL FIRST. Each camera manufacturer has a different "level" of folder above the raw clips that are the actual "essence" of the media. This is usually only an issue if you transfer the media from the card to another drive (like most people do). Usually you want to point at the card itself to do the import, so if you move the media to another drive, you should put the main folder INTO ANOTHER FOLDER. Then point to that level. (as a general rule of thumb).

Steve

On Jan 18, 2014, at 10:27 PM, Greg Huson <Greg@SecretHQ.com> wrote:

> I think you also need the MXF plug-in installed along with the Canon plug... but isn't that installed by the MC Installer?


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
http://info.yahoo.com/legal/us/yahoo/utos/terms/