Not sure about AJA/BM but disembedders can usually be daisy chained (or you may have 2 x SDI outputs available to feed to 2 x disembedders.
They'll only do 4 channels but you can switch which group of 4 channels you want (I'm guessing you want the 2nd in the chain to do group 2).
On the AJAHD10 you need to change dip switch 5 to 1, leave 6 at 0
<http://www.aja.com/pdf/support/manuals_conv/AJA_manual_HD10AMA.pdf>
--- In Avid-L2@yahoogroups.com, Philip Hodgetts <philip@...> wrote:
>
> I have a client working with a KiPro who wants to be able to separate out six channels of audio (analog XLR ideally) for surround sound. The channels are in the SDI appropriately and he has the KiPro update but all the demuxes I've seen from AJA and BMD seem to be four channels only.
>
> I found one that did 8 channels but with each pair on a 3.5mm jack, which doesn't seem very reliable in a screening room.
>
> TIA
>
>
> Philip Hodgetts
> President, Intelligent Assistance
> Conquering the metadata foundations of Final Cut Pro X http://bit.ly/mBDqIY
>
> Personal Blog http://philiphodgetts.com
> Cell 818 335 3916
>
>
>
> [Non-text portions of this message have been removed]
>
No comments:
Post a Comment