with a firmware upgrade - obviously not going to happen with the single-link
Mojo DX though.
Dylan Reeve
http://dylanreeve.com/
On Sun, Jul 17, 2011 at 1:41 PM, blafarm <blafarm@yahoo.com> wrote:
> **
>
>
> While it is true that raster independence can exist on a software or
> application level -- you still need I/O (unless your source material and
> delivery specifications are limited to file-based media). And you still need
> to display that signal on an external monitor (whether you are transmitting
> the signal via HD-SDI -- or HDMI).
>
> The question is whether or not the Mojo DX and Nitris DX boxes are
> hardware-limited. From an HD-SDI point of view, the Mojo DX is currently
> hardware-limited -- as it does not support dual link and no mention has been
> made (that I am aware of) regarding a possible upgrade path to 3G. And I
> don't know if there are other hardware limitations which might prevent
> either of those boxes from processing resolutions above 1080p.
>
> One thing is certain, many of the products manufactured by the 3rd party
> companies at that show -- support resolutions that far exceed 1080p.
>
> And, so my question/comment was that: is it possible that the release of
> Version 6 might usher in a chapter where Avid's own hardware solutions are
> determined to be behind the curve (in terms of resolutions above 1080p) --
> compared to the products offered by the 3rd party companies.
>
>
> --- In Avid-L2@yahoogroups.com, Andi Meek <kwikpasta@...> wrote:
> >
> >
> > Isn't the raster size a function of the software, not the hardware? For
> example, my MCSoft works in 1080p etc but i have no hardware attached.
> Compressing or decompressing frames happens in the RAM doesn't it? I know DX
> accelerates this process for DNx media but if vers 6 is 64bit and you can
> throw 32GB of ram at it...? I don't know but i'd like to...
> > Andi
> >
> > To: Avid-L2@yahoogroups.com
> > From: blafarm@...
>
> > Date: Sat, 16 Jul 2011 18:00:43 +0000
> > Subject: [Avid-L2] Re: Avid Event in Burbank
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Regarding this vague reference to "Raster Independence" -- and the
> implied support for third party hardware in the future ...
> >
> >
> >
> > It would seem that Avid's current versions of DX hardware (Nitris & Mojo)
> will probably be require a "refresh" to even be competitive with the
> capabilities of the current crop of third party hardware providers.
> >
> >
> >
> > Correct me if I am mistaken, but while the Nitris DX is dual link capable
> (but not 3G) -- I have never heard mention of resolution support for
> anything over 1080p. I understand there is a FPGA in the mix -- but I am
> unaware if this is dedicated to internal "processing" -- or to I/O.
> >
> >
> >
> > And, the Mojo DX, at its outrageous price point, is not even dual link
> capable (and I sincerely doubt it is 3G capable) -- and it has even less
> processing power (or card slots) than the Nitris DX.
> >
> >
> >
> > Unless there's something about these devices that I don't know, which is
> certainly very possible, it would seem that the release of Version 6 may
> very well herald in a chapter where Avid's hardware solutions are the lowest
> performing options available.
> >
> >
> >
> > And where those of us who supported the company and who *recently*
> purchased those hardware products -- will find ourselves, once again, behind
> the eight ball and needing to buy new hardware -- whether it's Avid's or a
> third party.
> >
> >
> >
> > --- In Avid-L2@yahoogroups.com, "Luca Gazzolo" <luca_gazzolo@> wrote:
> >
> > >
> >
> > > Still smells of standard frame sizes rather than custom frame size,
> doesn't it?
> >
> > >
> >
> > > --- In Avid-L2@yahoogroups.com, "Terence Curren" <tcurren@> wrote:
> >
> > > >
> >
> > > > Raster seems more appropriate for describing frame size than
> resolution.
> >
> > > >
> >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
Search the offical complete Avid-L archives at: http://archives.bengrosser.com/avid/
If you want to donate to Red Cross quake relief, you can do so through your cell phone. Text redcross to 90999 to make a $10 donation. It will be on your next cell bill.Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)
<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
No comments:
Post a Comment