Original cables. Both setups allowed for higher rez with older PC/driver/video cards.
Dave Spraker
Principal, spraker.tv
Shared Storage Solutions | Consulting | Sports Audio
Northwest Territory Manager, Western Rep Associates
Broadcast and AV Manufacturer's Representative
dave@spraker.tv
(503) 897-0250
From: Avid-L2@yahoogroups.com [mailto:Avid-L2@yahoogroups.com]
Sent: Thursday, April 2, 2015 11:40 PM
To: Avid-L2@yahoogroups.com
Subject: Re: [Avid-L2] HP Low Resolution Blues
If it's the wrong DVI cables wouldn't there have been the same problem on the old system? Or are these new cables on the new systems. I read the original post as if the cables were used on the old system with the same Dream Color monitors. Did I misunderstand?
---In Avid-L2@yahoogroups.com, <jeff@...> wrote :
Wrong DVI cables. You need the ones with most of the pins rather than just half of them. FULL DVI. Easy fix.
Jeff Kreines
On Apr 3, 2015, at 1:47 AM, "'Dave Spraker' avid@... [Avid-L2]" <Avid-L2@yahoogroups.com> wrote:
So setting up two brand new bitchin' z840s with the Avid supplied Nvidia driver fed from HP supplied DP to DVI adapters to pairs of HP Dreamcolor monitors.
It's showing the native rez as 1920x1080. Huh? On the z800s these replaced we were running the real, higher native rez of the monitors – which doesn't even show up as an option in Windows or the Nvidia tool now.
Anyone else see/dealt with this yet? Greg Staten?
It's not the extenders – one system is just long DVI cables and the other is Gefen DVI over Cat6 but both performed better previously.
TIA,
Dave Spraker
Principal, spraker.tv
Shared Storage Solutions&nb sp; | Consulting | Sports Audio
Northwest Territory Manager, Western Rep Associates
Broadcast and AV Manufacturer's Representative
dave@...
(503) 897-0250
Posted by: "Dave Spraker" <avid@spraker.tv>
Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (4) |
No comments:
Post a Comment