I spoke with someone who is successfully using OCZ SSD 2.5 drives with an ICY DOCK to physically mount in the existing HD ports in the Z800. No additional mods and he's claiming 1500mbps!
KEN
--- In Avid-L2@yahoogroups.com, "blafarm" <blafarm@...> wrote:
>
> For the record, this is the reason I suggested possibly considering an HP-blessed system drive (if it is a new and fast 6G drive):
>
> http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=125&prodSeriesId=3718645&prodTypeId=12454&objectID=c02711513
>
> or this shorter link:
>
> http://tinyurl.com/a37qog9
>
>
>
> --- In Avid-L2@yahoogroups.com, "blafarm" <blafarm@> wrote:
> >
> > I would strongly recommend only buying a SSD intended for a System drive from HP. The tolerances are quite critical in HP's Workstations.
> >
> > I have personally tried several high-end SSD drives that could not be mounted as either the System drive -- or even as D, E, F -- in my Z800.
> >
> > And that incompatibility experience has been perfectly replicated in my new Z820.
> >
> > For the record, the HP SSD drives come with a 3.5 to 2.5 carrier.
> >
> > Your search for an HP-blessed SSD might start on this page:
> > http://h18000.www1.hp.com/products/quickspecs/13379_na/13379_na.HTML
> >
> > And, the part number for the carrier alone is 675769-001, which you can find here:
> > http://partsurfer.hp.com/Search.aspx?searchText=675769-001
> >
> >
> > Good luck.
> >
> >
> >
> >
> > --- In Avid-L2@yahoogroups.com, "ksirul" <kenavid2@> wrote:
> > >
> > > for system drive in Z800. Whadayall like?
> > >
> > > KEN
> > >
> >
>
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (11) |
No comments:
Post a Comment