Re: [Avid-L2] Nitris DX FPGA reprogram Power Cycle?

I'm an 'unplug-at-the-wall' kinda guy. An amber light on the front of the Nitris DX box just says standby to me, and not necessarily power cycle.


On 6 May 2012, at 06:55, John Moore wrote:

> While setting up various startup disks for SNDX 6.0.1.1 and 5.5.3 I see that the NitrisDX gets reprogrammed when switching which requires a power cycle at the end. I shut down the computer and once it's off I can't seem to find a way to power down the NitrisDX with the front panel button. I have opted to just unplug it to be sure it's power cycled. Do I need to unplug the NitriDX after each reprogramming or is it enough to just shut down the computer? IIRC I can hit the NitrisDX front panel button to have it go from yellow to green and reboot but is there a way to shut it off. Maybe not sense that messes with the PCI buss etc... What are those that have to bounce back and forth doing for the power cycle.
>
> John Moore
>
> Barking Trout Productions
>
> Studio City, CA
>
> bigfish@pacbell.net
>
> [Non-text portions of this message have been removed]
>
>



[Non-text portions of this message have been removed]



------------------------------------

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/