Bouke,
Are you sure that's true for NTSC DV? I thought the Avid field order
switch only applied to PAL DV in order to keep it consistent with
non-DV PAL.
D.
On 31 December 2011 14:43, bouke <bouke@editb.nl> wrote:
>
>
>
> If you export as QT it is the same content, but in the Avid DV codec.
> And that is upper field first while the rest of the world uses lower field
> first.
> If you export from Avid with the 'use Avid codecs' turned off, you end up
> with the 'correct' field order.
> (Do check yourself, there was some madness in some versions, same as with
> color levels)
>
> Bouke
>
> VideoToolShed
> van Oldenbarneveltstraat 33
> 6512 AS NIJMEGEN
> The Netherlands
> +31 24 3553311
> www.videotoolshed.com
> For large files:
> http://dropbox.yousendit.com/BoukeVahl998172
>
>
>
> ----- Original Message -----
> From: "DAVID VAUGHN" <d.w.vaughn@usa.net>
> To: <Avid-L2@yahoogroups.com>
> Sent: Saturday, December 31, 2011 3:30 PM
> Subject: [Avid-L2] Archiving DV25 411 tapes
>
> I have two questions. The first is that I have old DV25 411 miniDV and
> Digital 8 tapes I wish to archive on hard drives. Am I right that if I
> capture in MC6 as DV25 411 MFX and then export to QuickTime for archiving
> that
> I retain original (bit-for-bit) quality and that only the wrapper has
> changed?
>
> Second, these tapes contain movies shot on miniDV tape, edited in Edit DV or
> Cinestream and then digitally cut back to tape. There is noticeable
> interlace
> artifact with movement. I assume line order got reversed at some stage and
> there is nothing that can be done short of re-edting from original tape.
> Are
> there options in MC6 for the capture or export that might correct this?
> Thanks. David.
>
No comments:
Post a Comment