are both In and Out fields empty?
If not, clear the fields.
If they are filled in, MC expects 'some' kind of TC to start when the given
time arrives.
Bouke
VideoToolShed
van Oldenbarneveltstraat 33
6512 AS NIJMEGEN
The Netherlands
+31 24 3553311
www.videotoolshed.com
For large files:
http://dropbox.yousendit.com/BoukeVahl998172
----- Original Message -----
From: "Jason Gillet" <jsg5403@yahoo.com>
To: <Avid-L2@yahoogroups.com>
Sent: Friday, May 27, 2011 5:05 PM
Subject: Re: [Avid-L2] Capturing non TC source into Avid
Yes Deck Control is off the red "Don't do That" symbol is over the deck
icon. I have the Timecode source: set for auto Detect and I named the tape
DVD. I just renamed it again with a new name and still I get the same error.
I also tried with TC on or off.
I'm running v 5.0.3.7
Jason Gillet
Editor/Engineer
Moving Pictures NYC
________________________________
From: Steve Hullfish <steve4lists@veralith.com>
To: Avid-L2@yahoogroups.com
Sent: Friday, May 27, 2011 11:01 AM
Subject: Re: [Avid-L2] Capturing non TC source into Avid
Do you have deck control turned off? Look for the button that looks like a
tape deck and turn it off. The TC track doesn't actually matter. Once you
have the deck control off, you still need to assign a "tape name" but that
can just be "DVD." I do this all the time for scratch narration. Deck
control needs to be off. TC can be on (it will just use time of day, IIRC)
Steve Hullfish
contributor: www.provideocoalition.com
author: "The Art and Technique of Digital Color Correction"
co-author: "Color Correction for Video: revised edition," "Avid Xpress Pro
Editing Workshop" and "Avid XpressDV On the Spot"
presenter: Class On Demand's "Complete Training for Avid Media Composer" AND
"Complete Training for Apple Color"
On May 27, 2011, at 9:56 AM, Jason Gillet wrote:
> I haven't tried to dig a DVD into 5.0 up until now. I usually use MPEG
> Stream clip. For some reason I am unable to load a non TC source into Avid
> via capture tool. I have no TC selected loading Component using Analog XLR
> and Timecode Source: is set to Automatic. I am getting this error message:
> Exception: In order to do an In-Out Capter, the Capture Tool must be in
> deck control mode and the TC button must be enabled.
>
> I just want to hit record and load the footage. I don't need TC. Why can't
> I do this????
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
If you want to donate to Red Cross quake relief, you can do so through your cell phone. Text redcross to 90999 to make a $10 donation. It will be on your next cell bill.
No comments:
Post a Comment