Not related to the problem but perhaps related to the solution of fewer bins. I read on one of the Avid forums that in order to relink ama media it is often, if not always, necessary to have the ama bins open for the relink to work. I haven't had much real work with ama so I'm curious if this is in fact a requirement to relink ama media. Anybody got some experience with the relinking?
--- In Avid-L2@yahoogroups.com, "nick_ravich" <nick_ravich@...> wrote:
>
> Michael- Many thanks for the response.
> I'll keep your advice in mind - shorter sequence, less bins open with less stuff in them, clearing monitors. This is our one and only set of XDcam HD 50 mbps media (all other tapeless is EX 35 mbps or P2 DVC Pro HD.)
> I've got my MacPros pretty well stacked with RAM - at least 12GB in each. Think it makes sense to get more?
> Also, any idea why this stuff isn't showing up in XDcam Clip Browser? It is in one of my MacPros, but not the other. And they should all have same level of plug-ins.
> Thanks, Nick.
>
> --- In Avid-L2@yahoogroups.com, Michael Brockington <brocking@> wrote:
> >
> > Hi Nick:
> >
> > I see the same sort of issue (intermittant - same error message,
> > horizontal blue line funkiness) working with AMA-linked R3D clips. In
> > my case, I am working with clips on an internal drive. I associate it
> > with having many bins open with large numbers of AMA files, or long
> > AMA-linked sequences. I suspect it's a symptom of running low on memory
> > -- AMA looks like a real memory hog.
> > Keep an eye on the percentage memory use in your project window. If
> > you can, I would try dividing your material into shorter sequences,more
> > bins with fewer clips in them, having fewer bins open at once, clearing
> > the menus in your source and record monitors, and of course, transcoding
> > to a native codec for real work.
> >
> > Cheers,
> > --Michael
> >
> > On 11-03-30 1:08 PM, nick_ravich wrote:
> > >
> > > Hello-
> > >
> > > Running MC5 on 2.66 & 2.93 GHz 8-core Mac Pros, OS 10.6.
> > >
> > > Recently shot our first batch of Xdcam HD footage - 1080/60i MPEG
> > > HDD422 50 mbps - and have kinda sucessfully ingested into Avid, off an
> > > external drive using, AMA volume link.
> > >
> > > Kind of sucessfully bec/ it's oddly intermitent - after a couple of
> > > failed attempts at ingesting (see below about repaired drive), I was
> > > able to get AMA volume link to work. Media appeared in bins & played
> > > back in app. But over time - say 2 or 3 launches of the app - it
> > > starts to get increasingly wonky. I've brought in 4 optical disks
> > > worth of media, into 4 separate bins. At certain point app won't let
> > > me open some of the bins and I get an "Exception: Failed to get the
> > > same temporal offset from the AMA Plug-in" error message. Also, the
> > > clips in the bins I can open play back really funkily, with odd
> > > horizontal blue line patterns.
> > >
> > > Also unsucessful in playing this footage in XDcam clipbrowser (though
> > > it will recognize my XDcam EX stuff.)
> > >
> > > Again, I'm linking directly from an external drive (to which the
> > > original optical disk media had been transferred.) Know that there was
> > > an issue with original field drive transfer to this working drive; one
> > > of the optical disk media sets/folders failed to transfer. I did a
> > > disk repair on the field drive and it seemed to correct itself. Is it
> > > possible there's some fatally corrupt bit of media that's messing
> > > things up?
> > >
> > > I assume it's not a case of a missing driver - since there's on other
> > > hardware besides the external drive involved. And the XDcam HD plug in
> > > is pre-installed. Will latest patch help? A responder to a previous
> > > related post suggested the below.
> > >
> > > Thanks,
> > >
> > > Nick.
> > >
> > > Here are the best guides:
> > > http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=367205
> > >
> > > and
> > > http://www.avid.com/ama
> > >
> > > and there are many, very good xdcam tutorial videos in my
> > > http://www.freddylinks.com pdf
> > >
> > > Make sure you have the correct OS:
> > > http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=267087
> > >
> > > The latest version, and MC patch: 5.0.x = 5.0.3.8 latest
> > > http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=379435
> > >
> > > The correct XDCAM, EX drivers (see readme Page 22 for the the version
> > > you have)
> > > http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=370951
> > > And that you don't have cabling issues, those could be trickier to solve.
> > >
> > > ..and I almost forgot this classic: Repair permissions
> > > http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=271837
> > >
> > >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
If you want to donate to Red Cross quake relief, you can do so through your cell phone. Text redcross to 90999 to make a $10 donation. It will be on your next cell bill.
No comments:
Post a Comment