What you are saying makes sense about adding a tape name but that is not supposed to be needed in XD Direct's batch import workflow. They also have a "batch capture" mode which adds tape names to the material as part of the ingest automatically. But the "Batch Capture" workflow is for when you have one of the XD Cam decks and end up capturing with deck control like we would have with tape.
Clearly there is something we are doing wrong or there is some aspect of Ver. 6.5.4 that is problematic. I wonder if there is anything with the ama preference about legacy XDCam support being checked or not that might interfere with this process. I'm pretty sure the AEs tried working with both choices and still could not get a proper decompose.
When you say, "You can decompose xdcam clips fine. Avid treats it just like it would a tape." does that mean I can AMA link to an XDCam disk then transcode to an offline SD resolution. Edit in the SD offline 23.976 project and then take the sequence into an HD project, modify the format to HD, and then decompose to end up with the shorter clips with handles? Assuming all that is correct then for uprezzing I would think I could ama link to the original XDCam and relink the sequence and then transcode with handles. In this scenario it seems like I wouldn't even need to decompose first as I could transcode with handles. The fact that you say, "Avid treats it like tape." is what I've been under the impression of from all I've heard the past few years. The one difference is that there is no tape name on the XD Cam clips right? And I've been under the impression that adding a tape name to the XDCam clips will defeat the ability to batch import later.
Have I misunderstood about the ability of XDCam to selectively import just the sections used from an XD Cam with handles? Perhaps I've confused this with transcoding a relinked sequence with handles? I remember early on with XDCam the selective clip import was painfully slow but I thought that was ironed out years ago. Am I wrong about that?
Unfortunately I have not worked on many projects that shot XDCam and those I have the uprezzing was done by AEs and I didn't have any dealings with the exact uprezzing of the material.
---In Avid-L2@yahoogroups.com, <kwikpasta@...> wrote :
To: Avid-L2@yahoogroups.com
From: Avid-L2@yahoogroups.com
Date: Sat, 22 Aug 2015 12:01:11 -0700
Subject: RE: [Avid-L2] Anybody using or familiar with XD Direct for mass ingest of XDCam material?
My limited experience/knowledge with XDCam material is that it was one of the first formats that truly allowed for a proper workflow that would not import entire clips so I'm surprise Avid isn't decomposing those clips. I know Avid use to decompose with handles standard imports and that would screw them up. Now I'm not sure if Avid is protecting us from that kind of screw up that had been allowed in the past.
I'm pretty sure we've done something wrong in setting up the XD Direct settings or there is something about our Avid settings that can be fixed. I can't imagine the rental house would be unaware of this major problem. I do know they said to decompose the sequence before batch importing. I would have thought it would have been an ama linking to the master material and relinking the sequence to that and then a transcode with handles but more will be revealed and I'll post what the solution is.
---In Avid-L2@yahoogroups.com, <kwikpasta@...> wrote :
To: Avid-L2@yahoogroups.com
From: Avid-L2@yahoogroups.com
Date: Sat, 22 Aug 2015 00:55:59 -0700
Subject: RE: [Avid-L2] Anybody using or familiar with XD Direct for mass ingest of XDCam material?
We tried decomposing the sequences, which scared me but was recommended by the rental house as the proper workflow, and when we tried to decompose Avid just created decompose clips that are the length of the entire original XD Cam clips.
We tried decomposing both captured and imported clips and got the above result. We tried decomposing only imported clips and got the same result and when we tried decomposing only captured clips no clips were created. So clearly Avid knows these clips are imports.
Traditionally decomposing imports is a no no but Avid would allow you to do it. Now I don't know if our inability to decompose these clips with handles is an Avid thing where is trying to protect us from screwing up or if there is something about the XD Direct that is prohibiting a traditional decompose of the XD Direct clips. I'm figuring it's something we are missing either in XD Direct settings or an Avid setting we haven't found yet.
I was thinking that the XD Direct SD 23.976 clips for offline would allow for an uprez that would just be ama linking to the XDCam master disk and the online sequence would just come online or perhaps require a relink to selected clips in open bins. Then we could do this for each disk needed and transcode with handles to make the online rez clips. I'm not sure if that will work as the suggestion is a batch import after decomposing the online sequence and that does not appear to be cooperating at this point. I'm sure with the proper guidance from the rental house we will sort it out.
Posted by: bigfish@pacbell.net
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (9) |
No comments:
Post a Comment