This IS the Avid L2: Re: [Avid-L2] Re: Copy multiple filters from one clip to many

Thursday, April 25, 2013

Re: [Avid-L2] Re: Copy multiple filters from one clip to many

An alternative is to follow Terry's steps (autonest multiple effects on a track above the clip) then Option/Alt-drag the effect icon for the outside effect from the Effect Editor back to a bin. This gives 'Effect (with source)'. There is no actual source in this case, just filler, but this is a conglomerate of all the effects applied and lets you apply multiple effects in one pass on to other clips. In the specific case of the OP, I'd have saved the PIP with source and then edited this in elsewhere, as required, then stepped into the PIP and replaced the original clip with a new clip.

With Best Wishes,
Roger Shufflebottom
+44 7973 543 660

>________________________________
> From: Terence Curren <tcurren@aol.com>
>To: Avid-L2@yahoogroups.com
>Sent: Wednesday, 24 April 2013, 21:29
>Subject: [Avid-L2] Re: Copy multiple filters from one clip to many
>
>
>
>
>Follow the previous steps.
>
>Step inside the PIP (or whatever you are using to superimpose on V1) effect on the shot on V2.
>
>Create a new video track above the existing tracks inside the PIP effect.
>
>Cut the effects stack into that track.
>
>Now it will effect only what is being keyed in over the lower tracks.
>
>--- In Avid-L2@yahoogroups.com, "jesseg132001" <jesseg132001@...> wrote:
>>
>> -- In Avid-L2@yahoogroups.com, "Terence Curren" <tcurren@> wrote:
>> >
>>
>> > Not like in FCP. There are some cheats though. If you stack the effects on the next video track up, you could make a sequence out of that and cut it in over the other shots.
>>
>> I was trying this but it effects all of the layers below not just the top video layer
>> (as it would if I dragged the effects onto the clip itself).
>> The effect i'm going for is a film (Track V2) projected onto a shot with a screen (Track V1)
>>
>> I'm using Sapphire Film Damage, Sapphire Flicker, Color Effect, then re-sized and re-positioned with 3D Warp.
>>
>> If I did it as you suggest both V1 and V2 are effected whereas if I place the filters on the clip on V2 track V1 is unaffected. Maybe I'm missing something?
>>
>> Thanks for your help.
>> jesse
>>
>
>
>
>
>

[Non-text portions of this message have been removed]