My day job bought a bunch of the RTW TM9 units that sample the audio from the HD-SDI stream. I'm glad I wasn't paying for it since they are quite pricey but they sure do a good job.
http://www.rtw.de/en/products/audio-monitors/touchmonitor-tm9.html
Lee
SamDog Digital Post
--- In Avid-L2@yahoogroups.com, Tony Quinsee-Jover <tony@...> wrote:
>
> Ahh, Bouke,
>
> It was YOUR tool that I was thinking of :)
>
> So now some questions, which I'll take offlist.
>
> Thanks,
> Tony
>
> On 11/04/2013 10:05, bouke wrote:
> > Trouble is with R128 / Calm, you cannot really measure everything during
> > editing.
> > There are 3 things to take into concideration, momentary, peak and overall
> > loudness.
> > The first two are easy to check on a meter on your master. But the overall
> > requires an analysis of the entire show.
> > (Or, if you play it back, the average loudness ' up to so far', as used in
> > live broadcasts)
> > But the momentary and peak problems hardly / never occur if you mix
> > normally without hitting / getting close to the ceiling.
> > Otherwise, a very relaxed brick wall limiter (app 6 dB higher as you would
> > in the old days) will do the trick.
> > In my experience a normal mix (to -9dB peak as we used to do) is on spec
> > with R128 -23 LUFS, unless you throw in compression.
> >
> > Thus, IMHO an RT loudness meter is a relative useless tool. (But nice eye
> > candy for the client of course.)
> > Having a tool inside Avid to check In to Out on master output for loudness
> > would be useful. Until then i trust my tool.
> > (And for the record, win should be the same as mac.)
> >
> > Bouke
> >
> > VideoToolShed
> > van Oldenbarneveltstraat 33
> > 6512 AS NIJMEGEN
> > The Netherlands
> > +31 24 3553311
> > www.videotoolshed.com
> >
> > ----- Original Message -----
> > From: "Pat Horridge" <pat@...>
> > To: <Avid-L2@yahoogroups.com>
> > Sent: Thursday, April 11, 2013 10:47 AM
> > Subject: [Avid-L2] Re: Loudness measurement
> >
> >
> >> The plan is to have RTAS on the output master fader so that's an ideal
> >> place
> >> to drop a plugin in for final loudness check.
> >>
> >> Not clear currently if the loudness check is supplied or just shown as
> >> possible.
> >>
> >> We currently use the Nuegen visLM plugin and it's great.
> >>
> >>
> >>
> >> But I have seen mention of loudness checking in MC7.
> >>
> >>
> >>
> >> Pat Horridge
> >> Technical Director, Trainer, Avid Certified Instructor
> >> VET
> >> Production Editing Digital Media Design DVD
> >> T +44 (0)20 7505 4701 | F +44 (0)20 7505 4800 | E <mailto:pat@...>
> >> pat@... |
> >> <http://www.vet.co.uk> www.vet.co.uk | Lux Building 2-4 Hoxton Square
> >> London N1 6US
> >>
> >>
> >>
> >>
> >>
> >> [Non-text portions of this message have been removed]
> >>
> >>
> >
> >
> >
> > ------------------------------------
> >
> > Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
> > Yahoo! Groups Links
> >
> >
> >
> >
>
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (13) |
No comments:
Post a Comment