Hi Walid,
This was very clear, and your English is quite good!
This is called expanded nesting, and it's a great feature. I seem to recall that there used to be limitations when trying to use it with the color tool in Media Composer. I remember getting a message that said I had to step all the way in to correct a nested effect, but I would have to test to see if this is still true.
Best,
Shirley
-----Original Message-----
From: Walid Ketata <walidketata@gmail.com>
To: Avid-L2 <Avid-L2@yahoogroups.com>
Cc: Avid-L2 <Avid-L2@yahoogroups.com>
Sent: Sat, May 5, 2012 10:39 am
Subject: Re: [Avid-L2] Effect ordering question
Hello all,
First all the points here are excellent, but I want to make a remark concerning
the way that you want to do when modifying a nested effect, rather than step in
the effect you can go for segment mode, select the clip that contains the nested
effect, double clik on it then you will see another layer appear with the first
effect like in your exemple the color correction then open it with the effect
editor, now you can modify your nested effect with the results of your keying in
the monitor. And this applys also to any nesting that you do like animatte over
a color correction and all of this is under a picture in picture for example.
I hope this helps and forgive me for my english I am not a native speaker.
Walid Ketata
Senior video editor
JCC qatar
Walid's iPhone
On May 5, 2012, at 20:02, Shirley Gutierrez <guanacaa@aol.com> wrote:
> Hey Mike,
>
> These are all excellent points, and I agree with you completely about the
upsides and downsides of the Avid effect engine. Certain aspects of the software
are waaayyyy overdue for an upgrade in flexibility. As to your color issue, it
seems to me that you're on MC because of what you're describing. The Symphony
source segment effect allows me more flexibility. I stack and matte with that
all the time, and I don't have to step in at all. But then, that just raises
another point of pain, which is that Symphony exists at all, and that it offers
so little differentiation from MC apart from its elderly color tools. However,
those are tools I find hard to do without, so for now, Avid has its user base
over a barrel.
>
> Shirley
>
> -----Original Message-----
> From: Michael Towe <L2mail@m2digitalpost.com>
> To: Avid-L2 <Avid-L2@yahoogroups.com>
> Sent: Sat, May 5, 2012 9:32 am
> Subject: Re: [Avid-L2] Effect ordering question
>
> Hey Shirley,
>
> Fair enough, but let me first preface by saying I have been cutting pretty
> exclusively in FCP for the past 2 years so if this is something that's be
fixed
> please excuse my ignorance.
>
> Effects ordering as it effects alpha handling: This is something that has
always
> driven me crazy with Avid's effects engine. The keying example I just went
> through is one of them. Although Terry's suggestion of applying the color
> correction first worked, it's still a work around at best. If I want to
further
> refine the CC i have to step in to the timeline and I can no longer see how my
> corrected footage looks in the composite without stepping back out. Step in
and
> adjust, step out to see composite, rinse and repeat until you're happy. I
would
> rather be able to apply the key then apply a color correct and adjust, without
> it effecting the background.
>
> Another example would be the use of an Animatte effect. Let's say I want to
> animatte an object and then move it. Logic dictates that what I would do is
> animate the object that I want keyed out, then apply an effect to move that
> object. However when doing it this way the background layer gets picked up and
> moves with the composite. Of course we all know that reversing the order and
> applying the move first and then the annimate is the solution. But this is not
> only is non intuitive, it makes for twice the work. I have to move the image
> then the matte. I would rather see it work the logical way and allow a matte
cut
> and then a move. I remember when I first stumbled on to this issue back in the
> late 90's early 2000's right after animatte was introduced. I mentioned it to
an
> Avid rep here in San Diego at the 3Point Digital Office (Some of you LA folks
> will remember them) and the rep insisted that I was crazy and you could do it
> the way I initially wanted to. Off to the demo room we went to watch him
> discover the same thing I did.
>
> The other thing about the effects engine that drives me nuts is that there is
no
> way to add a soft edged drop shadow to anything. If I want to do a over the
> shoulder graphic and add a soft drop I have to go to Borris or AE. Really? in
> 2012 there is no soft drop? I would love to see this added to the effects
engine
> and make it a simple drop shadow effect that can be applied to anything.
Video,
> graphics, text etc…
>
> Now in all fairness there are things I love about Avid's effects engine. For
> example advanced keyframes. The level of adjustment over keyframes is amazing
> and something I really have missed. Also the ability to copy and paste
> keyframes. I was flabbergasted the first time I realized I could not do that
in
> FCP. The interframe effects ie. Animatte, and Paint. I can't tell you how many
> times the clone tool would have saved me oodles of time in the last couple
> years.
>
> Basically I want it all and I want it now damn it!!! :-). Of course I have
been
> in the business long enough to know that's not going to happen. All in all I
am
> liking being back in the Avid interface. Much of what I thought I had
forgotten
> in bubbling back up to the top which is always a cool. Right now I am just
glad
> I kept my AvidL subscription active over the last couple years ;-)
>
> Mike
> M2 Digital Post Inc.
> San Diego, CA
>
> On May 4, 2012, at 10:31 PM, Shirley Gutierrez wrote:
>
> > Hey Mike,
> >
> > How would you want it updated in this instance? I've had the same problem
with
> things key type effects instructions being applied to lower layers, but in
> general, Avid seems to do a better job of giving me nesting (i.e. restricting)
> options when it comes to this stuff than does FCP. Can you give us an idea of
> how this could work better for you? Forward thinking design ideas are always
> welcome!
> >
> > Shirley
> >
> > -----Original Message-----
> > From: Michael Towe <L2mail@m2digitalpost.com>
> > To: Avid-L2 <Avid-L2@yahoogroups.com>
> > Sent: Fri, May 4, 2012 9:04 pm
> > Subject: Re: [Avid-L2] Effect ordering question
> >
> > Thanks Terry! That worked. So it looks like the effect ordering, and how it
> > effects lower layers, is still as it always was. Wish Avid would have
updated
> > that. Things like this, or not being able to apply say an animatte, and then
a
>
> > resize to move the whole enchilada (and not take the background with it)
just
> > need to be updated. However for just straight cutting I see Avid is just a
> fast
> > as it's always been. It feels like old time to be back in the interface, and
> in
> > a good way.
> >
> > Thans again,
> >
> > Mike
> >
> > M2 Digital Post Inc.
> > San Diego, CA.
> >
> > On May 4, 2012, at 8:40 PM, Terence Curren wrote:
> >
> > >
> > > Step inside the spectra matte and apply the color correction to the actual
> > shot you are keying. Hopefully it doesn't mess up your key. (One of the
things
> I
> > miss about Ultimatte was the ability to color correct after the matte)
> > >
> > > --- In Avid-L2@yahoogroups.com, Michael Towe <L2mail@...> wrote:
> > > >
> > > > Hey L'ers,
> > > >
> > > > Back in the Avid seat again as I am adding Avid back into the shop and I
> > have an effects ordering question. Back in the Meredian/Adrinaline days I
> never
> > found a way round this but thought maybe something might have changed while
I
> > was away. Basically I want to apply and effect and only have it effect the
> layer
> > it is on, not the layers below. Here's an example�
> > > >
> > > > I have a background on V1 and a green screen shot on V2. I am using
> Spectra
> > Matte to key it out (Boy did I ever miss Spectra Matte) But now that I have
> the
> > key pulled I want to add a color correction to the keyed shot on V2. When I
do
>
> > the the correction applies through the stack to V1 as well. Is there any way
> to
> > isolate that correction to just V2 and not have it pass to the background on
> V1?
> > > >
> > > > Thanks in advance,
> > > >
> > > > Mike
> > > >
> > > > M2 Digital Post Inc.
> > > > San Diego, CA.
> > > >
> > >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> > ------------------------------------
> >
> > Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
> > Yahoo! Groups Links
> >
> > [Non-text portions of this message have been removed]
> >
> >
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
> Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
> Yahoo! Groups Links
>
> [Non-text portions of this message have been removed]
>
>
[Non-text portions of this message have been removed]
------------------------------------
Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links
[Non-text portions of this message have been removed]
No comments:
Post a Comment