In some specific cases, I have issues with a drive not mounting if it is connected and spinning at boot. Solution is simply to cycle the drive after boot. Does not happen often, or even 100% of the time under the same circumstance, and only on one machine of the two. Oddly, the two machines are about as identical as they can be so not sure why one and not the other except that I did not get the cards at the same time. Same drives even.
Cheers,
tod
On Mar 23, 2012, at 11:28 AM, Lou Wirth wrote:
> If you have a dual port sata card like, for example, this one:
>
> http://eshop.macsales.com/item/Newer%20Technology/MXPCIE6GRS/
>
> Can you connect different Sata drives to each port or do they have to be identical. Can I hook up an OWC 6TB Raid to one port and a GTech 6TB raid to the other port?
>
> thanks
>
> Lou
>
> Lou Wirth Productions
> 500Tamal Plaza, Suite 522
> Corte Madera, CA 94925
> www.louwirth.com
> 415-924-9411p
>
>
>
Tod Hopkins
Hillmann & Carr Inc.
todhopkins@hillmanncarr.com
[Non-text portions of this message have been removed]
------------------------------------
Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)
<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
No comments:
Post a Comment