Hmm, Aimee, I haven't wired up a mixer in a while and not at all with my Matrox. But shouldn't your speakers be hooked to line out on your mixer? And the tape out back to the computer sounds like some sort of loop to me. But, again, I haven't done this in a while. Matrox's tech support really is helpful. I think they're still in the "we need everybody to love us so we can get a bigger market share," phase. So don't be too concerned your asking them about third party hardware.
Martin
--- In Avid-L2@yahoogroups.com, Aimie Burns <aimielistserve@...> wrote:
>
> Hi Martin,
>
> Thanks so much for the help. I realised I forgot to mention, that I'm using a sound board.
>
> Soundboard setup:
>
> Matrox RCA out - to Tape In for my soundboard
> Tape out goes to my computer In.
>
> Speakers are connected to Soundboard - Line IN 1 and 2.
> _________________
> Aimie Burns
>
> On Nov 21, 2011, at 12:29 PM, martinhnelson59 wrote:
>
> > Aimee,
> > I'm running OS 10.6.8, but otherwise we have the same configuration so,
> > hopefully, I can help. First off, are your speakers plugged directly
> > into the Mini box? There are RCA jacks on the back to connect amplified
> > speakers to. Then check this link
> > <http://forum.matrox.com/mxo/viewtopic.php?t=4971&sid=36aa530fb58ea4e713\
> > 20f47a25a6f2a1> from the Matrox forum. I really haven't had an issue
> > with the "Important" paragraph. I have as many tracks as I need and no
> > more. Also, make sure System Settings>Sound>Output>Select a device for
> > sound output is directed to Matrox MXO2 Mini Audio Output.
> > Everything is running smoothly on my system except for two minor issues.
> > First, system alerts (for example, the 'whoosh' sound when an email is
> > sent in Mail) don't play. Second, the volume controls on the keyboard no
> > longer control levels. If I am in an app or website that has no built in
> > level control, I am compelled to adjust my speaker volume directly. I
> > have a call for the first and a thread
> > <http://forum.matrox.com/mxo/viewtopic.php?t=7013> for the second into
> > Matrox about these. Not sure if there's a way to deal with this.
> > And, speaking of contacting Matrox, their telephone support is free,
> > very good, patient and helpful. They are not, unfortunately, very
> > prompt. Their number is 866-270-4641.
> > Hope that helps,
> > Martin
> > --- In Avid-L2@yahoogroups.com, Aimie Burns <aimielistserve@> wrote:
> > >
> > > Hi All,
> > >
> > > Sorry if this problem has already been addressed, but I couldn't find
> > much info on it.
> > >
> > > AVID MC 5.5.3, running on OS 10.6.3
> > > Matrox Mini Firmware: 12.1, Software: 2.2.3
> > >
> > > The Issue:
> > > In Avid - if I am playing a sequence/ media and I have the Matrox on -
> > so I can view it on an output monitor - the sound is coming from the
> > external monitor, and not from my speakers. Now, if i turn the Matrox
> > off, I get sound from my speakers. (I know in the past, on an older
> > version of Avid, I was able to get sound from my speakers, while viewing
> > media on the output monitor)
> > >
> > > How do I get sound from my speakers, while viewing on an output
> > monitor?
> > >
> > > I've tried changing the Audio Project Settings in Media Composer -
> > I've tried to change the Sync mode - as I think this is where the
> > problem is, but every time I click on it, to change it - it goes back to
> > "Automatic". I think the HDMI is overriding the audio output options.
> > >
> > > Any suggestions?
> > >
> > > Thanks in advance.
> > >
> > > Aimie
> > > _________________
> > > Aimie Burns
> > > Peace Through Education
> > > www.peacethrougheducationfilm.com
No comments:
Post a Comment