What deck are you recording too? Some decks don't have insert or assemble only crash. Just throwing that out.
--- In Avid-L2@yahoogroups.com, Alan Miller <ammfx@...> wrote:
>
> blafarm <blafarm@...> wrote:
>
> If I'm not mistaken, this was a Nitris DX vs Mojo DX distinction. Not sure if that is the source of the OP's problem ... just mentioning. --- In Avid-L2@yahoogroups.com, "johnrobmoore" <bigfish@> wrote: > > I have most definitely output a 1080I 59.94 timeline to digibeta using the downconvert in the output tool/Digital Cut. You keep the project in 1080I and just enable downconvert and it should work. Not sure why it would be giving you problems. I'm not at the symphony right now but I know I've done it. > > --- In Avid-L2@yahoogroups.com, "ksirul" <kenavid2@> wrote: > > > > Although, I'm not sure if there's a delay when the Avid is doing a downconvert. Teranex has a 4 frame delay. > > > > --- In Avid-L2@yahoogroups.com, "ksirul" <kenavid2@> wrote: > > > > > > Can you patch TC from the LTC out of the BOB into the deck and hard record? > > > > > > > > > --- In Avid-L2@yahoogroups.com, Alan Miller <ammfx@> wrote: > > > > > > > > 1080i 59.94 > > > > > > > > > > > > > > > > -----
> Original Message ---- > > > > From: ksirul <kenavid2@> > > > > To: Avid-L2@yahoogroups.com > > > > Sent: Fri, April 15, 2011 4:47:18 PM > > > > Subject: [Avid-L2] Re: Downconvert > > > > > > > > what's your framerate on your timeline? > > > > > > > > > > > > --- In Avid-L2@yahoogroups.com, Alan Miller <ammfx@> wrote: > > > > > > > > > > I'm finishing up a piece that is has both HD and SD mixed in the timeline. > > > > > I can play it back through the center cut downconvert(don't ask) and it is > > > > >fine. > > > > > However, I can't do a digital cut through the downconverter to SD. I thought if > > > > > > > > > > I > > > > > transcoded the sequence it would work. But no. I can crash record and it's > > > > >fine. > > > > > However I need to be on a precise timecode for the audio and color correction. > > > > > > > > > > So is this possible or do I have to switch the tab to SD and put an effect > > > > > on all my HD shots to make it work. I hope not. > > > > > Alan Miller > > > >
> > > > > > > > > > > > > > > > > > > > > >_____________________________________________
> > > > > > > > > Search the offical complete Avid-L archives at: > > > > http://archives.bengrosser.com/avid/ > > > > > > > > If you want to donate to Red Cross quake relief, you can do so through your cell > > > > phone. Text redcross to 90999 to make a $10 donation. It will be on your next > > > > cell bill.Yahoo! Groups Links > > > > > > > > > >_____________________________________________
>
> I'm on a Nitris DX. The problem is the digital cut tool doesn't offer insert or assemble, only crash record. I transcoded the entire sequence so I know it should work.I'm pretty sure I've done this before in Symphony.
> Alan Miller
> --
> Sent from my Android phone with K-9 Mail. Please excuse my brevity.
>
> [Non-text portions of this message have been removed]
>
If you want to donate to Red Cross quake relief, you can do so through your cell phone. Text redcross to 90999 to make a $10 donation. It will be on your next cell bill.
No comments:
Post a Comment