If you get a chance, could you take a look at what driver you have installed for the Com Port on Win 7 - Thanks
--- In Avid-L2@yahoogroups.com, "Terence Curren" <tcurren@...> wrote:
>
> Works fine on my 8400s Win 7.
>
> --- In Avid-L2@yahoogroups.com, "Nick" <nick@> wrote:
> >
> > Hi all,
> >
> > I am running MC 5.5 on an xw8600 and can't get deck control through the Com Port to work. I am using a Rosetta Stone 232 to 422 adapter, but I also have an old Avid adapter cable, both of which used to work fine, but neither work now.
> >
> > The Rosetta Stone has both LED's lit up (which should indicate that the Com Port is working). The Com Port shows up as working in Device Manager with a Microsoft driver, I can select the Com Port 1 in the Deck Config, but when I go to auto configure or manually configure a deck Avid doesn't see any decks.
> >
> > I have previously used this setup with a Sony J3, but am now trying to connect to an DVW-M2000P.
> >
> > I thought it might be related to Win 7 drivers but I have got XP setup on a seperate boot drive and that doesn't work either.
> >
> > Looking at the Com1 drivers in Device Manager there is an entry for "Avid Serial", but this driver won't load.
> >
> > Anyone got any ideas? I am laying off a load of programmes today and am having to crash record, which is not ideal. Thanks
> >
> >
> >
> > Nick
> >
>
If you want to donate to Red Cross quake relief, you can do so through your cell phone. Text redcross to 90999 to make a $10 donation. It will be on your next cell bill.
No comments:
Post a Comment