Thank you everyone for the help and suggestions. As it turned out the problem was with the Avid Admin PC. It was a rental that came with the four Media Composer NitrisDX and the ISIS 5000. There were a lot of formally used drivers, pointers and such that were conflicting with the ATTO card. Once I cleaned up the PC and re-loaded the ATTO driver the Raid was seen and all was well.
I knew I could rely on the group to help me think straight in the heat of the moment. Thanks again
Gregg Foster
Field Productions
----- Original Message -----
From: "Pat Horridge" <pat@horridge.org.uk>
To: Avid-L2@yahoogroups.com
Sent: Friday, February 11, 2011 7:34:23 AM
Subject: [Avid-L2] Re: Major raid issue (a little OT)
First off does the ATTO see any scsi ids during the POST process at startup?
The raid could present itself as one device or multiple devices.
If you only get the two ID 7 entries ( the ATTO card itself)
then the issue is between the card and the raid.
Also check if LUNs are enabled in the ATTO BIOS in case the raids using them.
Sent from Pat's iPhone
[Non-text portions of this message have been removed]
No comments:
Post a Comment