I agree we've had so many issues moving content between Pre V5 and V5 machines we've had to move our plans forward and move all our machines including our Symphony to V5 Something i never do until at least a .1 release.
V5 still has many stability issues and the move to V5 now sees many more "issues" and restarts than we ever saw before.
But of course that is offset by the extra features V5 brings.
But we still get pre V5 projects coming in and it's luck of the draw what issues you'll have and what you'll need to fix on your clock to get it running ok on your systems.
We often have to remove effects and rebuild them to resolve a problem.
We also notice more occurrences of Avid just crashing for good rather than the old style of error you could recover from.
Hopefully 5.1 (or is that 5.3 or 5.5) will bring back that stability.
--- In Avid-L2@yahoogroups.com, "Dom Q. Silverio" <domqsilverio@...> wrote:
>
> Version 5 has problems with media, clip and/or sequences from older versions
> of the software.
>
> For example, filler Sapphire v3 from v2.x of the software will get the same
> error you mentioned unless you replace the filler.
>
> I have seen the errors also in "old" multicams and sequences with no FX.
>
> Try removing the FX. Sometimes you get lucky that you can reapply the same
> FX from the bin. Sometimes you have to rebuild it from scratch.
>
> Dom Q. Silverio
>
>
> On Mon, Dec 13, 2010 at 2:16 PM, johnrobmoore <bigfish@...> wrote:
>
> > Maybe a back rev. to V4 to reflash the Nitris bob and then back to V5?
> >
> >
> > --- In Avid-L2@yahoogroups.com, "editbruboy" <bruno@> wrote:
> > >
> > >
> > >
> > >
> > >
> > >
> > > Thanks, but it's nothing that simple. Left everything unplugged for hours
> > but it made no difference. On further investigation it seems that it's only
> > some of the realtime effects & the Symphony CC that seem to cause this
> > error. The console is reporting that the BOB failed to respond within 2000
> > milliseconds. In fact with some of the effects, if you press play and just
> > wait, it will eventually spring to life (maybe after 5 or 10 seconds) and
> > play the effect.
> > >
> > > Seems as if this system was working under a previous version of Symphony
> > (poss 4.02) but I can't confirm this. I wonder if this is a version 5
> > problem or that there's a hardware fault. Tried to run the ATE tests, but
> > this just crashed the 8400.
> > >
> > > Bruno
> > >
> > > --- In Avid-L2@yahoogroups.com, "Randall L. Rike" <indypix4u@> wrote:
> > > >
> > > > While unplugged, press the power button on the computer for 15 seconds.
> > Does a little better discharge.
> > > >
> > > > Randy
> > > >
> > > > Sent via BlackBerry by AT&T
> > > > *******************************
> > > > Randall L. Rike, ACI, ACSR Mac•Win•Unity•DS
> > > > (818) 595-4346 Pager
> > > > (818) 406-8480 Cellular
> > > > indypix4u@
> > > >
> > > > -----Original Message-----
> > > > From: "johnrobmoore" <bigfish@>
> > > > Sender: Avid-L2@yahoogroups.com
> > > > Date: Sun, 12 Dec 2010 00:57:59
> > > > To: <Avid-L2@yahoogroups.com>
> > > > Reply-To: Avid-L2@yahoogroups.com
> > > > Subject: [Avid-L2] Re: Symphony Nitris classic 'sfplayconsumer' error
> > > >
> > > > Just my usual shot gun suggestion. Shut down everything and remove the
> > power cord, especially from the computer itself. Leave the computer and bob
> > unplugged for 5 minutes and then plug them back in and restart. Sometimes
> > this drains the PCI bus power more completely than just shutting down. Many
> > times things come back up with a new view of the world and work. The power
> > bus drain is an assumption based on this working several times but I can't
> > say for sure that's what makes things work. Hope it works for you. Next
> > would be reseating the Nitris boards in the computer.
> > > >
> > > > --- In Avid-L2@yahoogroups.com, "editbruboy" <bruno@> wrote:
> > > > >
> > > > > Hi all,
> > > > >
> > > > > I'm having a problem with a classic Symphony Nitris system. It's the
> > usual xw8400, Nitris BOB, Avid Mediadock local SCSI storage, with version
> > 5.03 of Symphony.
> > > > >
> > > > > Although everything seemed to startup fine (no hardware errors, BOB
> > power switch shows green and I can see video output from BOB), there's a
> > problem occurring when you try to add any effect to a sequence. When you do,
> > the system becomes extremely sluggish, the clip refuses to play and the
> > error 'SFPlayConsumer::Execute TIMEOUT' appears on the record monitor. If
> > you wait around ten seconds and remove the effect then it behaves normally.
> > This seems to happen with any effect or when you apply a colour correction.
> > Tried new project and restarting PC and BOB with no success. Tried Googling
> > and there was some mention of Wacom drivers, but I don't have any Wacom
> > device installed. There was also a mention that it might be corrupt media or
> > bad stripe, so I captured some new media on the C drive (to rule out the
> > SCSI devices), put it into a new sequence but without success.
> > > > >
> > > > > Anyone come across this one before?
> > > > >
> > > > > Thanks
> > > > >
> > > > > Bruno
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > >
> >
> >
> >
> >
> > ------------------------------------
> >
> >
> > Search the offical complete Avid-L archives at:
> > http://archives.bengrosser.com/avid/
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>
No comments:
Post a Comment