Re: [Avid-L2] Re: "Cannot Lock to Automatic, Please check digital audio source or change inputs"

Yes - #632 dictates how 720p is output via HD-SDI.

jbal197 wrote:
> Yes, I forgot to mention that both Video and Audio is coming in
> HD SDI.
> So the "Cannot Lock to Automatic, Please check digital audio source or change inputs" is a somewhat normal-ish thing? I can continue digitizing "manually"(as i described below) and everything should be fine? Audio should not drift within 30 min captures?
>
> ***
>
> And then in response to Dom Silverio -
> Just so I understand, we are converting 720p TO 1080i, so then in this case I would check menu setting 632? I was slightly confused by your response...
>
> Thanks everyone!
>
>
>
> --- In Avid-L2@yahoogroups.com, "Dom Q. Silverio" <domqsilverio@...> wrote:
>
>> 1. The deck is looking for reference and / or incoming video signal.
>>
>> 2. Yes
>> To convert 720p check menu setting 632
>> To convert 1080i check menu setting 630
>>
>>
>>
>> Dom Q. Silverio
>>
>>
>> On Mon, Mar 1, 2010 at 2:50 PM, jbal197 <jbal197@...> wrote:
>>
>>
>>> Hello!
>>>
>>> I'm the assistant editor working with an avid andrenaline, g5 & the
>>> panasonic 1400 deck.
>>>
>>> everything was working fine, then the tech guys replaced our deck and now
>>> during capture I have to manually click "ON" A1 A2 A3 A4, press play, then
>>> Capture.
>>>
>>> After capture is complete A1 A2 A3 A4 turn OFF and a window pops up with
>>> the message:
>>> "Cannot Lock to Automatic, Please check digital audio source or change
>>> inputs"
>>>
>>> I am having to capture 30 min tapes in their entirety, so,
>>> other than having to do everything manually, it seems to be working fine.
>>>
>>> My question is, if this glitch is not fixable, can I go ahead with clicking
>>> the audio "on" manually without having any problems later? (i.e. audio
>>> drifts etc because of such long captures??)
>>>
>>> ***
>>>
>>> also an additional question:
>>>
>>> We are shooting 720/59.94p with the Panasonic Varicam camera and we are
>>> editing at 1080/59.94i with the DNxHD145 codec in Avid. According to the
>>> Panasonic AJHD 1400 spec sheet, the deck will cross convert the 720/59.94p
>>> footage to 1080/59.94i.
>>>
>>> Is there a setting I need to set on the deck, or does this happen
>>> automatically? (I have reviewed the manual and cannot find anything)
>>>
>>>
>>>
>>> ------------------------------------
>>>
>>> Please donate to the Red Cross to help those in earthquake ravaged Chile:
>>> http://tinyurl.com/y8pgceq
>>>
>>> Search the offical complete Avid-L archives at:
>>> http://archives.bengrosser.com/avid/
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>>
>> [Non-text portions of this message have been removed]
>>
>>
>
>
>
>
> ------------------------------------
>
> Please donate to the Red Cross to help those in earthquake ravaged Chile: http://tinyurl.com/y8pgceq
>
> Search the offical complete Avid-L archives at: http://archives.bengrosser.com/avid/
>
> Yahoo! Groups Links
>
>
>
>
>

--
Dom Q. Silverio

------------------------------------

Please donate to the Red Cross to help those in earthquake ravaged Chile: http://tinyurl.com/y8pgceq

Search the offical complete Avid-L archives at: http://archives.bengrosser.com/avid/

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/