Ofer Raveh
Post Production Engineer
Key Code Media
818-303-3980
-----Original Message-----
From: Avid-L2@yahoogroups.com [mailto:Avid-L2@yahoogroups.com] On Behalf
Of Marc Fisher
Sent: Wednesday, December 02, 2009 11:14 AM
To: Avid-L2@yahoogroups.com
Subject: Re: [Avid-L2] [Avid-Ll2]:DS 10 and RP/IMS Broker connected to a
Terrablock
Ofer,
first, you should post this tot he DS list, not the L2. you'd get a
much more precise group of DS user than here. as it is, there's a few
of us DS folks lurking here, just to help stir things up every now and
then.
The DS, i believe, needs write permissions just as much as the RP does.
As it is, it sounds like you've crossed some "wires" in your setup.
first installing, then moving, then disabling. DS is a finicky setup.
Did you shut down the DS and RP when you made these changes?
restarting them both? the Workgroup and project & media indexers needs
to be up first, then the RP.
As for Terrablock, i know the guys over at Modern VideoFilm have
there's on a TB. if you know anyone there, it may be worth a call to
them.. they've had it running since early 06.
Marc
On Dec 2, 2009, at 10:10 AM, Ofer Raveh wrote:
>
>
> Hey guys,
>
> I attached a DS 10 and RP/IMS Broker via Fiber to a Terrablock and
> installed the DS Workgroup controller on the RP. I mounted one
> Terrablock partition with 'write' permissions on the RP and gave the
> DS
> read only permissions to this partition. I was hoping that the RP will
> pick up the video from the Terrablock via the fiber cable, but it
> picked
> up the video from the DS via the Ethernet cable, which has a slower
> bandwidth.
>
> Has anyone successfully configured a DS workgroup with a Terrablock
> this
> way? Please share how it has been done.
>
> Eventually I removed the RP fiber from the Terrablock, and moved the
> DS
> Workgroup controller to run on the DS. It takes a long time for the RP
> (XW9300) to read the sequence from the DS (Z800 1GbitE), mount the
> drives, process and deposit the clip back to the drive. It remount the
> shared network drive every time which does not make any sense. I
> mapped
> the shared network drives, but the RP still remounted it every time.
> Windows Simple File Sharing is disabled on both computers.
>
> Is there a way for the RP to avoid remounting the drive everytime?
>
> Thanks,
>
> Ofer Raveh, ACSR
>
> [Non-text portions of this message have been removed]
>
>
>
Marc Fisher
cav2ya@sbcglobal.net
[Non-text portions of this message have been removed]
------------------------------------
Search the offical complete Avid-L archives at:
http://archives.bengrosser.com/avid/
Everything you MUST know about Color Correction in one book:
http://tinyurl.com/ColorCorectionforvideo Get your copy todayYahoo!
Groups Links
------------------------------------
Search the offical complete Avid-L archives at: http://archives.bengrosser.com/avid/
Everything you MUST know about Color Correction in one book: http://tinyurl.com/ColorCorectionforvideo Get your copy todayYahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)
<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
No comments:
Post a Comment