it's because Avid isn't properly recognising the deck, or I'm actually using
a deck that can't Assemble/Insert.
What deck are you using, and what is it configured as in Avid?
Dylan Reeve
http://dylanreeve.com/
On Sun, Apr 17, 2011 at 7:02 AM, johnrobmoore <bigfish@pacbell.net> wrote:
>
>
> What deck are you recording too? Some decks don't have insert or assemble
> only crash. Just throwing that out.
>
>
> --- In Avid-L2@yahoogroups.com, Alan Miller <ammfx@...> wrote:
> >
> > blafarm <blafarm@...> wrote:
> >
> > If I'm not mistaken, this was a Nitris DX vs Mojo DX distinction. Not
> sure if that is the source of the OP's problem ... just mentioning. --- In
> Avid-L2@yahoogroups.com, "johnrobmoore" <bigfish@> wrote: > > I have most
> definitely output a 1080I 59.94 timeline to digibeta using the downconvert
> in the output tool/Digital Cut. You keep the project in 1080I and just
> enable downconvert and it should work. Not sure why it would be giving you
> problems. I'm not at the symphony right now but I know I've done it. > > ---
> In Avid-L2@yahoogroups.com, "ksirul" <kenavid2@> wrote: > > > > Although,
> I'm not sure if there's a delay when the Avid is doing a downconvert.
> Teranex has a 4 frame delay. > > > > --- In Avid-L2@yahoogroups.com,
> "ksirul" <kenavid2@> wrote: > > > > > > Can you patch TC from the LTC out
> of the BOB into the deck and hard record? > > > > > > > > > --- In
> Avid-L2@yahoogroups.com, Alan Miller <ammfx@> wrote: > > > > > > > > 1080i
> 59.94 > > > > > > > > > > > > > > > > -----
> > Original Message ---- > > > > From: ksirul <kenavid2@> > > > > To:
> Avid-L2@yahoogroups.com > > > > Sent: Fri, April 15, 2011 4:47:18 PM > > >
> > Subject: [Avid-L2] Re: Downconvert > > > > > > > > what's your framerate
> on your timeline? > > > > > > > > > > > > --- In Avid-L2@yahoogroups.com,
> Alan Miller <ammfx@> wrote: > > > > > > > > > > I'm finishing up a piece
> that is has both HD and SD mixed in the timeline. > > > > > I can play it
> back through the center cut downconvert(don't ask) and it is > > > > >fine.
> > > > > > However, I can't do a digital cut through the downconverter to SD.
> I thought if > > > > > > > > > > I > > > > > transcoded the sequence it
> would work. But no. I can crash record and it's > > > > >fine. > > > > >
> However I need to be on a precise timecode for the audio and color
> correction. > > > > > > > > > > So is this possible or do I have to switch
> the tab to SD and put an effect > > > > > on all my HD shots to make it
> work. I hope not. > > > > > Alan Miller > > > >
> > > > > > > > > > > > > > > > > > > > > >
> >_____________________________________________
> > > > > > > > > > Search the offical complete Avid-L archives at: > > > >
> http://archives.bengrosser.com/avid/ > > > > > > > > If you want to donate
> to Red Cross quake relief, you can do so through your cell > > > > phone.
> Text redcross to 90999 to make a $10 donation. It will be on your next > > >
> > cell bill.Yahoo! Groups Links > > > > > > > > >
> >_____________________________________________
> >
> > I'm on a Nitris DX. The problem is the digital cut tool doesn't offer
> insert or assemble, only crash record. I transcoded the entire sequence so I
> know it should work.I'm pretty sure I've done this before in Symphony.
> > Alan Miller
> > --
> > Sent from my Android phone with K-9 Mail. Please excuse my brevity.
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
Search the offical complete Avid-L archives at: http://archives.bengrosser.com/avid/
If you want to donate to Red Cross quake relief, you can do so through your cell phone. Text redcross to 90999 to make a $10 donation. It will be on your next cell bill.Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)
<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
No comments:
Post a Comment