Thanks,
I had them check it and it's set for 23.98. They are digitizing to 23.98 which I
don't think should be a problem right?
They are also saying:
"I can put a tape in, digitize the whole thing, put the next tape in and the
deck rejects it. Then I try a tape that I have already digitized and it ejects
that as well."
They tell me they don't have a ref generator connected. I'm thinking this might
also be part of the problem but I'm not sure. Any thoughts?
Jason Gillet
Editor/Engineer
Moving Pictures NYC
________________________________
From: Bogdan Grigoresco <bogdan_grigorescu@yahoo.com>
To: Avid-L2@yahoogroups.com
Sent: Tue, March 29, 2011 12:48:31 PM
Subject: Re: [Avid-L2] AJA Io Box and 23.98
Get them to check the system settings on the J3, as it outputs 23.98/59.94
through the same spigot. They need to make sure it's not set to 23.98PD.
cheers,
Bogdan Grigoresco
www.finale.tv
--- On Tue, 3/29/11, Jason Gillet <jsg5403@yahoo.com> wrote:
From: Jason Gillet <jsg5403@yahoo.com>
Subject: [Avid-L2] AJA Io Box and 23.98
To: Avid-L2@yahoogroups.com
Date: Tuesday, March 29, 2011, 7:19 PM
Has any one had any issues loading footage using the AJA Io box at 23.98 into a
MC 5.5 system? Client's getting
"Exception HWSK error: A frame-rate problem has been detected with your attached
hardware. Please save your work and reboot system to restore performance."
They are loading using a J3 HDCAM I haven't taken a look at their system yet but
I wanted to be prepared before I was able to check it out.
Thanks,
Jason Gillet
Editor/Engineer
Gillet Productions
----- Original Message ----
From: Gerald van Leipsig <GeraldAvid@gmail.com>
To: Avid-L2@yahoogroups.com
Sent: Tue, March 29, 2011 11:24:42 AM
Subject: Re: [Avid-L2] Re: Commit multi-cam on Final Cut?
Thank you Mark!
On Mar,29 2011, at 4:11 PM, Mark wrote:
> Final Cut Pro calls this command, "Collapse Multiclip". You'll find it under
>the "Modify" pull down menu.
>
> Mark
>
> --- In Avid-L2@yahoogroups.com, Gerald van Leipsig <GeraldAvid@...> wrote:
> >
> > Hello,
> >
> > A colleague of me is having trouble exporting a sequence from Final Cut. He
>gets a XML error on exporting both to XML, and to AAF using Automatic Duck.
> > We're guessing its related to the multi-cam clips present in the sequence.
> >
> > Since there seem to be many on this list who use both FC and Avid I thought
>I'd ask here:
> > Is there a command/workaround in FC that achieves the same result as the
>commit multi-cam command in Avid to get rid of the extra clips in a group? Any
>other solutions anyone can think of?
> >
> > TIA, Gerald.
> >
>
>
[Non-text portions of this message have been removed]
------------------------------------
Search the offical complete Avid-L archives at:
http://archives.bengrosser.com/avid/
If you want to donate to Red Cross quake relief, you can do so through your cell
phone. Text redcross to 90999 to make a $10 donation. It will be on your next
cell bill.Yahoo! Groups Links
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
If you want to donate to Red Cross quake relief, you can do so through your cell phone. Text redcross to 90999 to make a $10 donation. It will be on your next cell bill.
No comments:
Post a Comment