[Avid-L2] Vtr emulation Cable Pin Outs from Avid

Jeff,
Here are the pin outs from Avid and the one's I had suggested on the Avid SN forum.  They match but I was unaware of the 4 to 6 and 6 to 4 for Transmit and Receive commons.  I'm still not convinced those are necessary since all the serial control cables that I've run only used pins 1-3 and 7-9 but perhaps there is some need for the 4 to 6 commons that might give problems.

Pin out of VTR emulation cables:

VTR emulation cable for Mac: 0070-00205-01

 8 pin mini DIN Male
 
 9 Pin Female D-Sub

 6
 
 7

 8
 
 3

 3
 
 2

 4
 
 1+9 (tied together)

 5
 
 8

 1,2,7 not used
 
 4,5,6 not used

 

VTR emulation cable for PC: 0070-00506-01

9 Pin Male D-Sub
 
 9 Pin Female D-Sub

 1 Frame Ground
 
 1 Frame Ground

 2 Receive A
 
 8 Receive A

 3 Transmit B
 
 7 Transmit B

 4 Transmit Common
 
 6 Transmit Common

 5 Spare
 
 5 Spare

 6 Receive Common
 
 4 Receive Common

 7 Receive B
 
 3 Receive B

 8 Transmit A
 
 2 Transmit A

 9 Frame Ground
 
 9 Frame Ground

How do you rate this document?




Poor

1

2

3

4

5

John Moore
Joined on Thu, Feb 2 2006Burbank, CAPosts 138Points 1,545






Re: VTR Emulation mode gone Cross over Cable pin outs

Reply
Send to friend

Edit
Favorites
Contact








If
I read the following chart correctly then to build the necessary RS-422
cross over I hook pin 3 to pin7(TX+ to RC+) and pin 2 to pin 8(RC- to
TX-) Does this seem right?

DB-9 RS422 Pinouts
The TX and RC signals as well as the pin 1 ground follow the SMPTE
standard.   Antona uses the added pins 5 and 9 for application of
external power to our adapters.   The pinouts below are referenced as
coming from our series ANC-6000 adapter when it is configured for master operation.

DB9FUNCTIONIDENTIFICATION

1GROUNDground for RS-422 and/or external power

2RC-RS-422 minus side input
3TX+RS-422 plus side output
4 -not used-
5GROUNDground for RS-422 and/or external power
6 -not used-
7RC+RS-422 plus side input
8TX-RS-422 minus side output
9+VOptional +5V to +12V DC @ 100ma

  The pinouts below are referenced as coming from our series ANC-6000 adapter when it is configured for slave operation.

DB9FUNCTIONIDENTIFICATION
1GROUNDground for RS-422 and/or external power
2TX-RS-422 minus side output
3RC+RS-422 plus side input
4  -not used-
5GROUNDground for RS-422 and/or external power
6  -not used-
7TX+RS-422 plus side output
8RC-RS-422 minus side input
9+VOptional +5V to +12V DC @ 100ma

Symphony Nitris 3.1.1
[view my complete system specs]

John Moore Barking Trout Productions bigfish@pacbell.net







[Edit Tags]

John Moore

Barking Trout Productions

Studio City, CA

bigfish@pacbell.net

[Non-text portions of this message have been removed]

------------------------------------

Search the offical complete Avid-L archives at: http://archives.bengrosser.com/avid/

Everything you MUST know about Color Correction in one book: http://tinyurl.com/ColorCorectionforvideo Get your copy todayYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/