Yes it has to be unplugged- a powerstrip with an easy to access button is helpful, like a Furman
On May 5, 2012, at 10:55 PM, John Moore <bigfish@pacbell.net> wrote:
> While setting up various startup disks for SNDX 6.0.1.1 and 5.5.3 I see that the NitrisDX gets reprogrammed when switching which requires a power cycle at the end. I shut down the computer and once it's off I can't seem to find a way to power down the NitrisDX with the front panel button. I have opted to just unplug it to be sure it's power cycled. Do I need to unplug the NitriDX after each reprogramming or is it enough to just shut down the computer? IIRC I can hit the NitrisDX front panel button to have it go from yellow to green and reboot but is there a way to shut it off. Maybe not sense that messes with the PCI buss etc... What are those that have to bounce back and forth doing for the power cycle.
>
> John Moore
>
> Barking Trout Productions
>
> Studio City, CA
>
> bigfish@pacbell.net
>
> [Non-text portions of this message have been removed]
>
>
[Non-text portions of this message have been removed]
No comments:
Post a Comment