I have always done the Power Plug.
Mike
From: John Moore <bigfish@pacbell.net>
Reply-To: <Avid-L2@yahoogroups.com>
Date: Sat, 5 May 2012 22:55:58 -0700 (PDT)
To: Avid L2 <Avid-L2@yahoogroups.com>
Subject: [Avid-L2] Nitris DX FPGA reprogram Power Cycle?
While setting up various startup disks for SNDX 6.0.1.1 and 5.5.3 I see that
the NitrisDX gets reprogrammed when switching which requires a power cycle
at the end. I shut down the computer and once it's off I can't seem to find
a way to power down the NitrisDX with the front panel button. I have opted
to just unplug it to be sure it's power cycled. Do I need to unplug the
NitriDX after each reprogramming or is it enough to just shut down the
computer? IIRC I can hit the NitrisDX front panel button to have it go from
yellow to green and reboot but is there a way to shut it off. Maybe not
sense that messes with the PCI buss etc... What are those that have to
bounce back and forth doing for the power cycle.
John Moore
Barking Trout Productions
Studio City, CA
bigfish@pacbell.net <mailto:bigfish%40pacbell.net>
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
No comments:
Post a Comment