Re: [Avid-L2] Adrenaline AES Audio In And Out

So what that seems to suggest is that if I had my cables for 1+2 and 3+4
labelled wrongly, then that might be the root of my problem. I'm sure
that my inputs/outputs were all going in and out on the correct channels
when the Meridien system was hooked-up, and I've tried swapping them,
just to be sure.

But I'm still being deafened by silence.

Again, if anyone has any thoughts, or has an 02R connected to an
Adrenaline box with AES...

On 13/06/2010 17:20, Christopher Pitbladdo wrote:
> When you capture audio using the AES/EBU inputs on the Avid
> Adrenaline, always use AES/EBU channels 1 and 2 first. The AES/EBU 1/2
> connector syncs to the incoming digital signal. If you connect to the
> AES/EBU 3/4 connector only, the internal sync on the Avid Adrenaline
> does not sync with the incoming digital audio signal and the audio data
> will be corrupted. Use the AES/EBU 3/4 connector only if you need 4
> channels of AES/EBU audio.

[Non-text portions of this message have been removed]

------------------------------------

Please donate to the Red Cross to help those in earthquake ravaged Chile: http://tinyurl.com/y8pgceq

Search the offical complete Avid-L archives at: http://archives.bengrosser.com/avid/

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/