http://www.avid.com/static/resources/documents/solutions/Stereoscopic_3D_Guide_sec.pdf
It seems that you can go DVI out of your graphics card into either a DLP or a flat screen 3D monitor that uses either polarization or an active shutter system. Is that right?
What advantage is there to going through a Nitris verses DVI out? Why wouldn't a Mojo DX / Adrenaline / Mojo work?
What monitors have you guys used? Active or passive glasses?
Thanks,
Ted
--- In Avid-L2@yahoogroups.com, RT <huipro@...> wrote:
>
> LOL. I haven't heard of any IMAX 3D theatres going bust yet, but we
> should keep an eye out,
>
> I recall seeing lots of JVC and SAMSUNG 3D monitors on the floor. A
> couple MIRACUBES. Did anyone notice what was being used at the MC5 3D
> demo pod?
>
> I have not run 3D through my Avid yet, but my understanding is that the
> fullscreen mode, or the DX hardware's HDSDI/HDMI outputs can be
> configured to monitor the LEFT/RIGHT images in any pattern you prefer.
> The editor would normally work with Avid's traditional 2D UI and slip on
> the glasses when they need to view in stereo.
>
> Whatever 3D monitoring solutions you decide upon, it should closely
> match your intended venue. Make sure the gear features HDMI V1.4 and
> is currently shipping.
>
> Lessee,.. other gotchas?
> Metafuze will convert filebased 3D sources to Stereoscopic DNxHD,
> usually halving the HD resolution while preserving metadata.
> Metafuze is a free PC app. Not for the Mac last I checked.
> http://www.avid.com/US/solutions/workflow/Metafuze
>
> I believe MOJO DX will handle live 3D capture and processing but it only
> has a single-link HDSDI input. Nitris has dual.
>
> And this should be a handy tool to have around at some point:
> http://www.blackmagic-design.com/products/hdlink/
>
> Almost forgot - don't neglect to buy more storage. Lots more. Give
> Dave Spraker a call.
>
> RT
>
>
> Terence Curren wrote:
>
> >
> >
> >
> > Are you folks really recommending AJA and Blackmagic cards for Media
> > Composer? Did I miss something?
> >
> > What you need is a Nitris DX and maybe the MojoDX does it but I
> > haven't tested that. Then you take the HDMI out of the Nitris to the
> > HDMI in of a 3D monitor.
> >
> > When it comes to your sources, you need to run the stereo pairs
> > through MetaFuze to turn them into a single clip for use in MC.
> >
> > Have fun, the fad is probably peaking as I write this. :-0
> >
> > --- In Avid-L2@yahoogroups.com <mailto:Avid-L2%40yahoogroups.com>,
> > Marc Fisher <cav2ya@> wrote:
> > >
> > > or go with the blackmagic extreme 3 card for 999. (about 2k less)
> > and you get sdi and hdmi out of the card with no additional
> > convertors. 3d in, and 3d out if need be. It's also approved for use
> > with MaD' vinci (Davinci on Mac), FCP, NUKE, AE, COLOR. but not Smack.
> > Approved for dual stream output to SRW5800 as well, in 2k 4:4:4.
> > >
> > > www.decklink.com
> > >
> > > Marc
> > >
> > >
> > > On Apr 22, 2010, at 11:27 AM, Shane Ross wrote:
> > >
> > > > Well, you need an HD card capable of 3D stereoscopic output. The AJA
> > > > Kona 3 does that...dual link SDI out, one signal per SDI. Then you
> > > > need a monitor with two HDMI inputs, and two SDI to HDMI converters.
> > > > And then a spendy 3D monitor.
> > > >
> > > > Unless you are going to MUX the signal. But I'm not sure how that
> > > > works. I just demoed the Kona 3, 3D output at NAB...
> > > >
> > > > -shane
> > > >
> > > > On Apr 22, 2010, at 11:13 AM, ihatefriction wrote:
> > > >
> > > >> I'm getting ready to start our first 3D job, and I'm looking at 3D
> > > >> monitors. Do you have any recommendations? Anything I should try to
> > > >> avoid? From what I've read, one of the DVI outputs from the computer
> > > >> goes straight to the monitor - is that right? Will I need a DVI to
> > > >> HDMI cable? Any other "gotchas" I should be aware of?
> > > >>
> > > >> Thanks!
> > > >>
> > > >> -Ted
> > > >>
> > > >>
> > > >>
> > > >
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > > >
> > > >
> > > > ------------------------------------
> > > >
> > > > Please donate to the Red Cross to help those in earthquake ravaged
> > Chile: http://tinyurl.com/y8pgceq <http://tinyurl.com/y8pgceq>
> > > >
> > > > Search the offical complete Avid-L archives at:
> > http://archives.bengrosser.com/avid/
> > <http://archives.bengrosser.com/avid/>
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > >
> > > Marc Fisher
> > > cav2ya@
> > >
> >
> >
>
>
>
> [Non-text portions of this message have been removed]
>
------------------------------------
Please donate to the Red Cross to help those in earthquake ravaged Chile: http://tinyurl.com/y8pgceq
Search the offical complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)
<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
No comments:
Post a Comment