Thanks Bouke and John. Unfortunately, there's nothing in the Atmos
Shogun manual about configuring the RS422 port. All they say is that
it's there. I suppose anything is possible, including the need to sway
xmit and receive pins in the cable. I'll try to mess with it some more
next week. --J.B.
bigfish@pacbell.net [Avid-L2] wrote:
>
>
>
> I haven't tried recently but I did back at 5.5 Avid build the reverse
> RS-422 cable, basically it swapped transmit and receives from pin to
> pin like a normal vtr cable and swapped pin 2 to 7 and 3 to 6 or some
> such thing. I had a long thread on it several years back. It did
> ultimately work and I was able to control Avid from a Digibeta with it
> appearing as the playback machine. Fun experiment I think the cable
> is buried on my work bench which means I will probably find Hoffa
> before it.
>
> ---In Avid-L2@yahoogroups.com, <bouke@...> wrote :
>
> From memory, there are several different 422 cables. (remembering the
> time when you could slave Avid as a player? That needed a different one.)
> Or, it's a setup issue where you have to assign the port. (Let alone
> baud rate, stop / parity eider.)
>
> But WHY? It's a file based recorder that shoots ProRes and DNxHD, you
> can AMA link to the files and be done with it…
>
> Bouke
>
> Edit 'B / VideoToolShed.com <http://VideoToolShed.com>
> van Oldenbarneveltstraat 33
> 6512 AS Nijmegen
> +31 6 21817248
>
>> On 20 Jan 2017, at 18:05, john beck jb30343@...
>> <mailto:jb30343@...> [Avid-L2] <Avid-L2@yahoogroups.com
>> <mailto:Avid-L2@yahoogroups.com>> wrote:
>>
>> Has anyone here had success connecting and controlling an Atmos
>> Shogun
>> to Media Composer? I briefly tried hooking one up via HDSDI and the
>> RS422 port on a Shogun Studio. I tried letting MC auto configure
>> and a
>> variety of deck templates but MC acts as if nothing is there.
>>
>> According to the Atmos Shogun manual, the port is RS422 an I
>> should be
>> able to control basic deck functions through it. I verified my
>> cables,
>> etc. by happily controlling a Sony HDW M2000. Many thanks for any
>> insight. --J.B.
>>
>
>
>
>
Posted by: john beck <jb30343@windstream.net>
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (5) |
No comments:
Post a Comment