Here's the info you need, hasn't changed: http://24p.com/VFR.htm
Bob
--- In avid-l2@yahoogroups.com, <mrenz70@...> wrote:
It has been a while since I have captured DVCpro HD off tape as well. I think my workflow was to capture via firewire from 1200A into 960x720 23.976 project. A frames fall on 00 and 05 frames. If capturing 720p into a 1080i 59.94 project via SDI, set the 720 output in Video menu to upconvert to 1080i and capture away. Time code will be normal 30 frame count.
Mark Renz
Senior Editor
Outpost Worldwide
--- In Avid-L2@yahoogroups.com, <avid-l2@yahoogroups.com> wrote:
I just want to confirm if I have the following correct, it's been a while since I dealt with this format. The way the HDX-900 and DVCPro HD work in general is they record 60 frames to tape. Depending on whether you set it to 23.98 or 59.97/59.94 effects how often it captures a frame. If you shoot at 23.98 and then playback the tape in the 1200 or 1400 Panny deck you can set the deck to 23.98 for true 23.98 playback with 24 frame time code and can be captured into a 23.98 project. If you set the deck to 59.97/59.94 mode it will add the pulldown 2:3 cadence and convert the time code to 30 frame code which can be captured into a 1080i/59.94 Avid project. I will check with the collective to determine how the camera deals with "A" frame relative to time code. I assume it follows the typical standard of "A" frames on "00" and "05" time codes but I would like to hear from people who use this workflow more often. TIAJohn Moore
Barking Trout Productions
Studio City, CA
bigfish@...
__._,_.___
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (3) |
.
__,_._,___
No comments:
Post a Comment