hi Andi, thanks for that. Understand within the Avid changes, was wondering outside, on the desktop level, working with the AMA clips - do you change the volume folder, each clip, or both?
--- In Avid-L2@yahoogroups.com, Andi Meek <kwikpasta@...> wrote:
>
>
> When you've got your sequence and have opened the AMA volumes I add the tape number to the Tape column by selecting all the clips i need and using the Modify>Set Source menu command. We rarely use this workflow as, like you, we prefer to work with our media on the ISIS or locally, although we've moved away from transcoding to DNx resolution and just online in the native XDCAM codec. As long as it's not Long GOP the Avids handle it fine and you save a shed load on storage space, which is essential when you're working with the huge volumes of footage we're getting nowadays and we don't do hardly any effects work so it holds up fine for our purposes. I would add this step at the front of the workflow too i.e. Mount AMA volume, modify source THEN transcode. saves you adding it in later or accidentally mislabelling clips after the fact. HTH.
> cheers,
> Andi
>
> To: Avid-L2@yahoogroups.com
> From: phartel@...
> Date: Thu, 28 Jul 2011 05:12:51 +0000
> Subject: [Avid-L2] Re: AMA workflow-DSLR & XD cam EX
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> So here's a quick question (I do work with AMA and XDCAM a lot and avoid these by transcoding early to DNX HD res (220 or 220X, but you can't always do that, and in the interest of being prepared...) when you say you add the same tape number to the AMA clips - where? To the volume folder? To each individual clip? Where are you adding the tape # so it will relink?
>
>
>
> --- In Avid-L2@yahoogroups.com, Andi Meek <kwikpasta@> wrote:
>
> >
>
> >
>
> > You always have to reopen the AMA bins to relink, it's just the way it works. The way i would do it would be to follow Oliver's advice regarding the QT. With the XDCAM EX, open your AMA bins and transcode to your offline resolution. Add a tape number to the offline res clips that relates to the card that the footage was shot on so that you can track it back at conform - date, camera number and roll number works well. Then when ready to online put your sequence in a bin on its own, show reference clips to reveal the clips in the sequence and their unique tape numbers then mount the volumes you need. Now add the same tape number to the AMA clips and relink the sequence. HTH
>
> > Cheers,
>
> > Andi
>
> > To: Avid-L2@yahoogroups.com
>
> > From: scottesmith1@
>
> > Date: Mon, 25 Jul 2011 11:29:10 +0000
>
> > Subject: [Avid-L2] AMA workflow-DSLR & XD cam EX
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > Does anyone have a good workflow for conforming file based media? I recently worked on a project where I had great difficulty getting the finished sequence to link to the media so it could be transcoded for online. I had to manually open each AMA volume and relink the original bin containing all the file based media master clips. Then I was able to relink the sequence. I also had to manually modify the Canon DSLR clips to enter timecode which was lost in Symphony 5.5. The programme was offlined on a Media Composer 5.0.
>
> >
>
> >
>
> >
>
> > Thanks, Scott
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > [Non-text portions of this message have been removed]
>
> >
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
If you want to donate to Red Cross quake relief, you can do so through your cell phone. Text redcross to 90999 to make a $10 donation. It will be on your next cell bill.
No comments:
Post a Comment