There is NO drop frame in anything other than 29.97.
--- In Avid-L2@yahoogroups.com, Jeff Hedberg <jeff@...> wrote:
>
> Thanks Dom,
> Don't have Symphony - so I guess tape to tape it is.
>
> I know how to set the anchor point on the D5 - but I'll admit that I don't know how I'd do this on a Digibeta deck. (is this necessary?)
> I've set the D5's anchor point to be 01:00:00:00
> I just essentially play back the D5, and crash record on the digi. This looks good - but has given me mixed results with the timecode.
>
> I looked around online for some help and came across this post: http://lfhd.net/2008/10/22/timecode-calculator/
> I downloaded it - and it doesn't seem to convert like I expect at all.
>
> I punch in 00:01:30:00 in 29.97DF and then change to 23.98 (drop?!) and get an answer of 00:01:52:12 which really, really confuses me.
> I can't figure out how I'd use this to get my in and out lining up on the tape at all.
>
> Assuming I want the following:
>
> IN : 1:00:00:00
> OUT: 1:01:29:29
>
> IN: 1:03:00:00
> OUT: 1:04:29:29
>
> and so on - how would I figure out where those need to fall in 23.98 time code? Seems like this software needs a similar 'anchor point' setting?
>
> (maybe I'm missing something obvious)
>
> Jeff
>
> ------------------
> Jeff Hedberg
>
>
> On Jun 6, 2011, at 1:22 PM, Dom Q. Silverio wrote:
>
> > If you don't have Symphony DX with Universal Mastering, option 2 (downcovert
> > via deck is preferable).
> >
> > Make sure you are calculating frames and TC correctly (pulldown, DF vs NDF,
> > etc).
> > Second, make sure the deck has the same "anchor point" for the TC
> > conversion. For example make sure 01:00:00.00 in 23.976p is the same frame
> > as 01:00:00.00 in your 29.97 conversion.
> >
> > Dom Q. Silverio
> >
> > On Mon, Jun 6, 2011 at 1:04 PM, Jeff Hedberg <jeff@...>wrote:
> >
> > > I've got a head scratching workflow question.
> > >
> > > Footage is coming in via AMA - all shot @ 23.98 HD.
> > > After rough cutting (DNxHD 36) at 23.98 - I now need to output at 29.97 SD
> > > master.
> > > I relink AMA - and now have full resolution in the Avid.
> > >
> > > Hardware is Nitros DX.
> > > I had thought that I'd use the 'downconvert' video output and insert edit
> > > to digibeta - however MC complains that it can't control a 29.97 deck in a
> > > 23.98 project.
> > >
> > > So I've now started a 29.97 project and opened the sequences in there.
> > > Before it will output it needs to transcode. I have it do that at 1:1...
> > > then output.
> > >
> > > This is tape 1.
> > >
> > >
> > > I now output a D5 at 23.98, (from full res AMA files) then play it back and
> > > record a Digibeta from it.
> > > This Digibeta is tape 2.
> > >
> > >
> > > Tape 2's visually quality is a lot higher than Tape 1.
> > > However, Tape 2 - has timecode issues where I can't get the pieces to
> > > start/end on the frames they need to.
> > >
> > >
> > >
> > > What is the recommended workflow for dealing with something like this
> > > (changing TC rate from 23.98 to 29.97DF, as well as HD to SD)?
> > >
> > > I'm not happy with the Avid's transcoding/down-converting quality - but I
> > > can't seem to wrap my head around how to get my D5 tape set up properly for
> > > a tape to tape down convert.
> > >
> > >
> > > Thanks for any pointers.
> > >
> > > Jeff
> > >
> > > ------------------
> > > Jeff Hedberg
> > >
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > Search the offical complete Avid-L archives at:
> > > http://archives.bengrosser.com/avid/
> > >
> > > If you want to donate to Red Cross quake relief, you can do so through your
> > > cell phone. Text redcross to 90999 to make a $10 donation. It will be on
> > > your next cell bill.Yahoo! Groups Links
> > >
> > >
> > >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> >
>
>
>
> [Non-text portions of this message have been removed]
>
If you want to donate to Red Cross quake relief, you can do so through your cell phone. Text redcross to 90999 to make a $10 donation. It will be on your next cell bill.
No comments:
Post a Comment