Ghislain Thomasset <ghislain.thomasset@yahoo.fr> wrote:
If you are working with a Nitris DX, you have a special output for the SD downconvert. In the output setting, you must activ it. If you are working with Mojo DX, to have a SD output, you must have your project in SD to have a SD ouput. Thomasset Ghislain Tel : 06 23 16 50 52_____________________________________________
De : blafarm <blafarm@yahoo.com> À : Avid-L2@yahoogroups.com Envoyé le : Sam 16 avril 2011, 8h 56min 10s Objet : [Avid-L2] Re: Downconvert If I'm not mistaken, this was a Nitris DX vs Mojo DX distinction. Not sure if that is the source of the OP's problem ... just mentioning. --- In Avid-L2@yahoogroups.com, "johnrobmoore" <bigfish@...> wrote: > > I have most definitely output a 1080I 59.94 timeline to digibeta using the >downconvert in the output tool/Digital Cut. You keep the project in 1080I and >just enable downconvert and it should work. Not sure why it would be giving you >problems. I'm not at the symphony right now but I know I've done it. > > --- In Avid-L2@yahoogroups.com, "ksirul" <kenavid2@> wrote: > > > > Although, I'm not sure if there's a delay when the Avid is doing a >downconvert. Teranex has a 4 frame delay. > > > > --- In Avid-L2@yahoogroups.com, "ksirul" <kenavid2@> wrote: > > > > > > Can you patch TC from the LTC out of the BOB into the deck and hard record? >
> > > > > > > > --- In Avid-L2@yahoogroups.com, Alan Miller <ammfx@> wrote: > > > > > > > > 1080i 59.94 > > > > > > > > > > > > > > > > ----- Original Message ---- > > > > From: ksirul <kenavid2@> > > > > To: Avid-L2@yahoogroups.com > > > > Sent: Fri, April 15, 2011 4:47:18 PM > > > > Subject: [Avid-L2] Re: Downconvert > > > > > > > > what's your framerate on your timeline? > > > > > > > > > > > > --- In Avid-L2@yahoogroups.com, Alan Miller <ammfx@> wrote: > > > > > > > > > > I'm finishing up a piece that is has both HD and SD mixed in the >timeline. > > > > > > I can play it back through the center cut downconvert(don't ask) and it >is > > > > > >fine. > > > > > However, I can't do a digital cut through the downconverter to SD. I >thought if > > > > > > > > > > > I > > > > > transcoded the sequence it would work. But no. I can crash record and >it's > > > > > >fine. > > > > > However I need to be on a precise timecode for the audio and color >correction. > > > > > > > > > > So is
this possible or do I have to switch the tab to SD and put an >effect > > > > > > on all my HD shots to make it work. I hope not. > > > > > Alan Miller > > > > > > > > > > > > > > > > > > > > > > > > >_____________________________________________
> > > > > > > > Search the offical complete Avid-L archives at: > > > > http://archives.bengrosser.com/avid/ > > > > > > > > If you want to donate to Red Cross quake relief, you can do so through >your cell > > > > > phone. Text redcross to 90999 to make a $10 donation. It will be on your >next > > > > > cell bill.Yahoo! Groups Links > > > > > > > > > > [Non-text portions of this message have been removed]_____________________________________________
I can see the down convert output EE through the vtr. Its working properly. I just can't choose inset our assemble on the digital cut dialog.
--
Sent from my Android phone with K-9 Mail. Please excuse my brevity.
[Non-text portions of this message have been removed]
If you want to donate to Red Cross quake relief, you can do so through your cell phone. Text redcross to 90999 to make a $10 donation. It will be on your next cell bill.
No comments:
Post a Comment