Owen,
Upgrading the system is NOT an option at this time. The dongle and
software will remain at 3.5.9. May you please offer advice on running
this configuration in an environment higher than the Compatibility
matrix lists?
Thanks.
Jesse
--- In Avid-L2@yahoogroups.com, op <owen@...> wrote:
>
> i think u can upgrade to mc 5 and still return to the old system. u
have to update the dongle for the newer version but it is backwards
compatible.
> owen
>
>
>
>
>
> On Mar 2, 2011, at 9:36 PM, Jesstator wrote:
>
> > Greetings, Listers.
> >
> > I'm preparing to port my current MC Soft v3.5.9 install from it's
> > Windows XP-SP3 host to a Mac host. I'll be installing to a second
hard
> > drive, as the new system already has FCP/AJA Kona3 running. I will
> > actually keep the XP system running, and port the dongle back &
forth
> > should "legacy" I/O be required via my 1st-generation MOJO (I know,
my
> > system is old).
> >
> > I checked the MAC Avid Media Composer Version Matrix at:
> > http://avid. custkb.com/ avid/app/ selfservice/ search.jsp?
> > DocId=267087.
> >
<http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=267087.>
> >
> > The closest entry to my version is v3.5.4, which is linked to OSX
10.5.5
> > & 10.5.6 with QT 7.5.5) and 10.5.7 with QT 7.6.
> >
> > Since the next higher entry is v4.0.2, I gather from this
information I
> > must set-up my secondary hard drive to run no higher than OSX 10.5.7
&
> > QT 7.6. Is this correct, or may a successful attemt be made to
v3.5.9
> > run under 10.6.6/QT X? Does anyone out there have experience with
> > running Media Composer v3.5.9 in environments higher than OSX 10.5.7
&
> > QT 7.6?
> >
> > I plan to set-up the Avid hard drive environment within the next
week or
> > so, and would like to take advantage of Snow Leopard & QT X, if
> > possible.
> >
> > As always, anyone/everyone' s constructive feedback is greatly
> > appreciated.
> >
> > Cheers!
> >
> > Jesse Ettinger
> > http://www.ettingerproductions.com
> >
> > [Non-text portions of this message have been removed]
> >
> >
>
>
>
> [Non-text portions of this message have been removed]
>
No comments:
Post a Comment