The Console Command is: "SetAMAQTForcedFrameRate true
29.97" will force a 29.97 motion adapter on any QT files linked to.
Substitute 29.97 with whatever the frame rate you'd like.
When you're done type: SetAMAQTForcedFrameRate false 0 to
reset it. MC will remember what frame rate the clips were linked to even after
its turned off.
This isn't a switch, it will reset to normal AMA mode
after a restart. The clips will still be the original length requiring the
clips to be trimmed out.
This forum post has details on how to get around this: http://community.avid.com/forums/p/113361/657416.aspx#657416
--- In avid-l2@yahoogroups.com, <dylan@...> wrote:
I was sure there was a console command that would tell Avid to default the
speed to 100% (1:1 frames) of mix-n-match clips, but I can't find it.
Dylan Reeve
http://dylanreeve.com/
On Tue, Sep 3, 2013 at 8:22 AM, Lou Wirth < loutv@... > wrote:
> That was my original intention. But don't I have to change the speed in
> each clip in the sequence (118)? I was hoping for a more universal
> solution. I think the mix down is the way to go.
>
> thanks
> Lou
> Lou Wirth Productions
> 500Tamal Plaza, Suite 522
> Corte Madera, CA 94925
> www.louwirth.com
> 415-924-9411p
>
>
>
>
>
> On Sep 2, 2013, at 1:04 PM, Michael Hancock < mhancockeditor@... >
> wrote:
>
> > Make a 29.97 project and open the bins from the 59.94 project in
> > there. When you cut the footage into your sequence it will
> > automatically have a motion adapter applied.
> >
> > Now you can open the motion effect editor and change the speed from
> > whatever it is been changed to in order to conform to 29.97 back to
> > 100%. Voila! Slow motion and it still retains the original length of
> > your clips.
> >
> > Michael
> >
> > On Sep 2, 2013, at 3:55 PM, Lou Wirth < loutv@... > wrote:
> >
> > > Ok. Got through your steps. But the problem is. Once I build the
> sequence the clips are locked to a length. I apply slo mo and they not
> longer play out the entire duration as the are now only half speed. That is
> what I am trying to avoid. I want the clips to all be full length and half
> speed.
> > >
> > >
> > > Lou Wirth Productions
> > > 500Tamal Plaza, Suite 522
> > > Corte Madera, CA 94925
> > > www.louwirth.com
> > > 415-924-9411p
> > >
> > >
> > >
> > >
> > >
> > > On Sep 2, 2013, at 11:56 AM, Benjamin Hershleder < Ben@... >
> wrote:
> > >
> > >>
> > >>
> > >> Hi Lou,
> > >> I have a feeling one of the "large-brains" on the list will have some
> magic trick that will work like you're hoping.
> > >> But if for some reason there is no trick (too bad there's not an
> "Interpret Footage" feature like in After Effects), here's a way to apply a
> Timewarp pretty quickly to all those clips:
> > >> 1- On one clip: set the TW parameters you want (speed, interpolation
> method -- i.e. blended interpolated).
> > >> 2- Test the results.
> > >> 3- Once you have the ingredients as you want them, make an Effect
> Template.
> > >> 4- Enable the video track.
> > >> 5- Park the position indicator/blue line on the first clip in the
> sequence.
> > >> 6- Use the Select Right button to quickly select all 118 clips
> (places them in Segment Mode).
> > >> 7- Double-click the Effect Template that you put in the bin, and it
> will be applied to all 118 clips at once.
> > >>
> > >> Hope that helps,
> > >>
> > >> B
> > >>
> > >> ----
> > >> Benjamin Hershleder
> > >> Book: http://tinyurl.com/avidmc-book
> > >> Site: http://ContactBen.com
> > >>
> > >> On Sep 2, 2013, at 11:30 AM, Lou Wirth wrote:
> > >>
> > >>> Hi
> > >>> I shot my sons football game yesterday for his coaches. Shot
> 720/59.97 thinking I will run at 29.97 so it is slow and smooth. I started
> a 59397 project and brought in the footage (MC 7, my first experience) so
> now I have everything running in real time.
> > >>>
> > >>> What is the best way to have all the clips run at 29.97 so they are
> in slo mo, still play from beginning to end and are in one long sequence?
> should I start a new project? Modify clips? I am trying to not have to
> apply time warp to all 118 clips one at a time.
> > >>>
> > >>> Hope this makes sense.
> > >>>
> > >>> thanks
> > >>>
> > >>> Lou
> > >>> Lou Wirth Productions
> > >>> 500Tamal Plaza, Suite 522
> > >>> Corte Madera, CA 94925
> > >>> www.louwirth.com
> > >>> 415-924-9411p
> > >>>
> > >>>
> > >>>
> > >>
> > >> [Non-text portions of this message have been removed]
> > >>
> > >>
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > Search the official Complete Avid-L archives at:
> http://archives.bengrosser.com/avid/
> > > Yahoo! Groups Links
> > >
> > >
> > >
> >
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Search the official Complete Avid-L archives at:
> http://archives.bengrosser.com/avid/
> Yahoo! Groups Links
>
>
>
>
[Non-text portions of this message have been removed]
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (9) |
No comments:
Post a Comment