Classic Nitris. That could be the issue. Although now we figured it out, we are switching this out for a Nitris DX next week anyway.
--- In Avid-L2@yahoogroups.com, "johnrobmoore" <bigfish@...> wrote:
>
> What hardware? I think the universal mastering in HD was only available in a Nitris DX symphony and not the classic nitris. My system is an SNDX 4.0.5 and I'm pretty sure I had those choices a while back. I'll check when I get back on it.
>
> --- In Avid-L2@yahoogroups.com, "ksirul" <kenavid2@> wrote:
> >
> > DF and yes I checked, but as I mentioned earlier, this was only a 2 minute output. I'm going to check a longer piece tomorrow. This will eventually be for a 1 hour TV show.
> >
> > --- In Avid-L2@yahoogroups.com, "johnrobmoore" <bigfish@> wrote:
> > >
> > > Forgot to ask if you are going to a NDF master? Have you checked your output for frame accuracy?
> > >
> > > --- In Avid-L2@yahoogroups.com, "johnrobmoore" <bigfish@> wrote:
> > > >
> > > > I'm not at a symphony right now but I know I've output 23.976 HD to a digibeta with a downconvert to NDF time code. Curious how does the time code count when you use a 24Frame deck template but the deck is 59.94 with 30F code? What happens when the time code is say 25 frames which doesn't exist in 24F code. In the past I believe I've seen Avid output based on the 24F code but the output was off. That was a case of incorrect time code sense which isn't what you were dealing with. Usually when using the universal mastering Avid wants to be feed sync matching the output your recording so I'm surprised a 24F deck template doesn't give rise to the error. There are cross convert settings in the video output tool and there are more in the digital cut tool. Is your digital cut tool set to 59.94?
> > > >
> > > > --- In Avid-L2@yahoogroups.com, "ksirul" <kenavid2@> wrote:
> > > > >
> > > > > OK, so the trick was to set the template to 24p even though the deck is 59.94. That worked.
> > > > >
> > > > > --- In Avid-L2@yahoogroups.com, "ksirul" <kenavid2@> wrote:
> > > > > >
> > > > > > I'm manually using the deck template that is NOT 24p(HDW F50024). Is there another setting I'm missing somewhere?
> > > > > >
> > > > > > --- In Avid-L2@yahoogroups.com, Seth Isaac Buncher <seth_buncher@> wrote:
> > > > > > >
> > > > > > >
> > > > > > > Hi Ken,
> > > > > > > As I recall, you have to adjust the deck manually in the digital cut tool. And make sure the deck's TC Sense setting is set to 59.94, obviously. I've done a few of these type of outputs recently and it works.
> > > > > > > Warmly on a warm day,Seth
> > > > > > >
> > > > > > > To: Avid-L2@yahoogroups.com
> > > > > > > From: kenavid2@
> > > > > > > Date: Tue, 10 May 2011 19:30:58 +0000
> > > > > > > Subject: [Avid-L2] v4.0.5 Universal Q
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > So I'm testing a 1080p 23.98 sequence outputting to 1080i 59.94 in Symphony 4.0.5. 1080p 23.98 sequence. Video Output tool I have CrossConvert set to 1080i 59.94. If I try to digital cut to this format it gives me an error that says the deck doesn't match the project rate. Am I missing something? I think this should work.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > KEN
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > [Non-text portions of this message have been removed]
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
If you want to donate to Red Cross quake relief, you can do so through your cell phone. Text redcross to 90999 to make a $10 donation. It will be on your next cell bill.
No comments:
Post a Comment