[Avid-L2] Q logic SanBox 5600 16 port fibre switch?

Just curious about the Q logic sanbox 5600 16 port fibre switch as video performance goes.  The specs and lit say it's good for video.  Having problems on a SanMP setup when I digital cut and someone else is capturing to a different drive in the array I get stalls on ouput about every 6 minutes.  I don't know much about san components but the specs say it auto sensing up to 4.2Gb/sec.  Sure seems like 2 SD 1:1 streams shouldn't choke the system but the Avid seems to get finicky when doing a digital cut while someone captures on another system on the SanMP.  Just trying to learn a little more about what could be going on.  I know SanMP is not ideal but it seems to have been configured properly so I don't have a clue what if anything has changed to cause this problem.  Any suggestions would be appreciated.

John Moore

Barking Trout Productions

Studio City, CA

bigfish@pacbell.net

[Non-text portions of this message have been removed]

------------------------------------

Please donate to the Red Cross to help those in earthquake ravaged Haiti: http://www.redcross.org/en/donatemoney

Search the offical complete Avid-L archives at: http://archives.bengrosser.com/avid/

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/