Dear colleague,
Thank you for your message. Kindly note that I am out of office from 12 July till 07 August 2015, both days inclusive. During my absence please coordinate with Mr. Karim Dhib KDhib@jcctv.net (Tel: 55169204 ) for the issues related to Post Production and Mr. Wessam Abdellatif WAbdellatif@jcctv.net (Tel: 66598775 ) for the issues related to Acquisitions.
I will not be able to check my e-mails regularly but please keep me CC in all correspondence.
Best regards,
On Jul 13, 2015, at 15:35, Roger Shufflebottom rogershuff@yahoo.co.uk [Avid-L2] <Avid-L2@yahoogroups.com> wrote:
>
> I use the Ultrastudio Mini-Monitor to feed an HP Dreamcolor via HDMI. It has the advanatge that Da Vinci Resolve Lite recognises it and I can get the Resolve output on the monitor, too.
>
>
> With Best Wishes,
> Roger Shufflebottom
> +44 7973 543 660
>
>
> From: "Greg@SecretHQ.com [Avid-L2]" <Avid-L2@yahoogroups.com>
> To: Avid-L2@yahoogroups.com; David Dodson <davidadodson@sbcglobal.net>
> Sent: Saturday, 11 July 2015, 6:20
> Subject: RE: [Avid-L2] Using An External Client Monitor With MC Software Only
>
>
>
> BMD makes one like the T-tap, too for $145 - never used that. Ultra Studio Mini-monitor, you know... BMD. AJA is twice the price, but, you know... AJA.
>
> GH
>
> -------------------------------------
> Greg Huson
> Chief
> Secret Headquarters, Inc
> 323-677-2092
> Greg (at) SecretHQ.com
> www.SecretHQ.com
> DigitalServiceStation.com
>
>
>
>
>
>
>
> -------- Original Message --------
> Subject: Re: [Avid-L2] Using An External Client Monitor With MC Software
> Only
> From: "David Dodson davidadodson@sbcglobal.net [Avid-L2]"
> <Avid-L2@yahoogroups.com>
> Date: Fri, July 10, 2015 9:17 pm
> To: RRF Avid <rrfavid@HotSprocketFilms.com>
> Cc: Avid-L <Avid-L2@yahoogroups.com>
>
>
>
>
> Considered it? I didn't even know it existed!
>
> This looks promising. Thanks, Rich.
>
> DD
>
>
> David Dodson
> davidadodson@sbcglobal.net
>
>
>
> On Jul 10, 2015, at 8:49 PM, RRF Avid <rrfavid@HotSprocketFilms.com> wrote:
>
> David,
>
> Have you considered the AJA T-Tap to drive your client monitor?
>
> https://www.aja.com/en/products/t-tap
>
> This has worked great for me for Media Composer, Premiere Pro, After Effects and other apps.
>
> - Rich
>
>
> On Jul 10, 2015, at 8:09 PM, David Dodson davidadodson@sbcglobal.net [Avid-L2] <Avid-L2@yahoogroups.com> wrote:
>
> I may have asked this theoretical question before, but I don't think I got an answer, so I'll try again…
>
> I have a two monitor set-up: a 27" Retina iMac, and a companion 27" LED Cinema Display. I also have the OWC Thunderbolt 2 hub connected to the iMac. This OWC hub has an HDMI out. As such... is anyone aware of whether or not it's possible to somehow use this HDMI port to send a permanent HD "client monitor" signal out of MC to either a consumer HD monitor or projector? Point being, to do this using the software only, and without a Mojo or Nitris box.
>
> I made a furtive attempt to plug in a Samsung HD flat panel via the HDMI port on the OWC hub, but that only succeeded in throwing all displays out of whack, as they all reset their resolutions. So far, I've been able to find nothing that would suggest that what I'm thinking is possible. But it's also just as possible I'm missing something.
>
> Anyone doing anything like this?
>
> Thanks,
>
> DD
>
> David Dodson
> davidadodson@sbcglobal.net
>
>
>
>
>
>
>
>
>
>
>
>
[Non-text portions of this message have been removed]
Posted by: Walid Ketata <walidketata@gmail.com>
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (11) |
No comments:
Post a Comment