It's in the vtr setup menu. I don't have a machine till tomorrow but if you scroll through the menu from the top you will see Edit Field around where there are other settings related to editing. IIRC you'll see things like edit Retry nearby and that I believe is in the 400's. HTH. And once again make sure you are no looking at a dub of your original master. If you are the error might have happened during dubbing although most of the time I see those a complete frame delays I wouldn't be surprised if a field delay could be induced somewhere in peripheral gear.
--- In Avid-L2@yahoogroups.com, <pepe.serventi@...> wrote:
>
> Sorry yes FIELD. Do you know where that setting is on HDCAM SR 5800
>
>
> ---In avid-l2@yahoogroups.com, <bigfish@> wrote:
>
> Your initial post said it was a FRAME late not a field late. There is a vtr setup menu item for edit F1 or F2. Standard is to edit on F1. If this is set to F2 then your first edit will indeed come in on field 2. I've had many a dub end up a frame off when the dub house runs the signal through too much processing equipment without compensation. Especially when they try and do too many things in one pass of dubs. Make sure to check the tape right on the machine looking at the VITC time code, which is in fact Anc TC now but the display still calls it VITC. If the time code sense is off when you capture the tape that could also lead to confusion when you try and check the capture in Avid.
>
> --- In Avid-L2@yahoogroups.com mailto:Avid-L2@yahoogroups.com, <pepe.serventi@> wrote:
> >
> > Running Symphony 6.5.4 Windows
> > Nitris DX
> > Output to Sony SRW 5800
> > Template; Sony SRW5860 60
> > 9 pinn RS422 Deck control
> > Reference going to the avid and deck
> >
> >
> > International QC discovered it, I got the tape back ingested the first 5 seconds into a 59.94 project. Then I step through by fields and the show starts 01.00.00.00 on the second field.
> > Remember this is a FIELD not FRAME issue.
> > Thanks in advance
> >
> >
> > ---In Avid-L2@yahoogroups.com mailto:Avid-L2@yahoogroups.com, <bogdan_grigorescu@> wrote:
> >
> > give us some details Pepe:
> >
> >
> > -HW and OS
> > -SYM version
> > -I/O
> > -RS422 control
> > -VTR model, template and menu settings
> > -reference signal to Avid and deck
> > -what TC info has been used to declare the tape 1frame late
> >
> >
> > cheers,
> > BG
> > www.finale.tv http://us-mg5.mail.yahoo.com/neo/www.finale.tv http://us-mg5.mail.yahoo.com/neo/www.finale.tv
> >
> >
> >
> > From: "pepe.serventi@" <pepe.serventi@>
> > To: Avid-L2@yahoogroups.com mailto:Avid-L2@yahoogroups.com
> > Sent: Monday, November 11, 2013 12:04 PM
> > Subject: [Avid-L2] Cadence
> >
> >
> > So I have a show that is off lined 23.976 NTSC that I deliver 59.94 on HDCAMSR. Lately when I do a cross convert out of the symphony to the tape, my show has been starting a frame late. I checked my sequence and when I look at my 59.94 DF Time code window the sequence starts on the hour, and on the A frame. Has anyone else run into this issue? Is it a cadence issue.
> >
>
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (6) |
No comments:
Post a Comment