This IS the Avid L2: Re: [Avid-L2] Re: Feature film edit stuck in "mounting volumn" loop

I can only suggest the usual suspects:

1- New User settings
2- Quit Avid, then trash media databases (the 2 msm files inside each Avid MediaFiles folder). Relaunch Avid and those will rebuild.
3- Check permissions on the drives (cmd-i). I've had weirdness where permissions (on a mac) would change on their own for a drive and cause problems.
4- If on a mac, also use Disk Utility to rebuild the permissions, then do a full restart of the system.

Those are some of the usual things to try . . . anyone have any others that I'm forgetting at the moment?

HTH,

B
----
Benjamin Hershleder
Book: http://tinyurl.com/avidmc-book
Site: http://ContactBen.com

Wear It In Post!
Fun T-shirts, mousepads, mugs & more
for Post Production Professionals
http://www.WearItInPost.com

On May 7, 2013, at 6:05 PM, roberto.miller@ymail.com wrote:

> Thanks for responding, Terence. I searched the project folder and didn't find "Avid Mediafiles" there. However, I did find an "Avid Mediafiles" on my main media drive and also one on my Avid Media Drive.
>
> A few weeks ago I bought an SSD drive and thought it might help performance to have all Avid media renders go to it, and it's been working fine till now.
>
> To test, I just renamed the "Avid Mediafiles" on my main media drive, and relaunched. Some clips and renders were off-line, but the "mounting volume loop" problem was still present.
>
> Thanks for the suggestion, though. Happy to try further ones!
>
> --- In Avid-L2@yahoogroups.com, "Terence Curren" <tcurren@...> wrote:
> >
> > You probably have a folder labelled "Avid Mediafiles" in your project folder. Move it out and the problem will go away.
> >
> > --- In Avid-L2@yahoogroups.com, "roberto.miller@" <roberto@> wrote:
> > >
> > > Shooting this flare into the air in hopes that one or more seasoned pros have some insight that will help us get back to cutting our film.
> > >
> > > Upon loading our project I get:
> > >
> > > "This volume has not yet been mounted by the application. You can either mount all volumes or load another project." It would be nice if it said which volume...
> > >
> > > Clicking "Mount all Volumes" leads to: "The volume was not found after mounting all volumes"
> > >
> > > Clicking OK leads to an infinitely repeating loop. Usually.
> > >
> > > I thought it might be due to a couple of minor VFX clips I received and put put into the last edit, but I took them off-line and the problem remains.
> > >
> > > Ideas to address this?
> > >
> > > System and Project stats:
> > > - MC 6.5.2 on Mac PB running 10.8.2, i7 core, Thunderbolt to 6TB media drive and a 255GB SSD drive for media renders
> > > - we are 95% AMA linked to Apple ProRes clips (which has been working fairly well for our production clips, despite 45 seconds to close any bin).
> > >
> > > Any help GREATLY appreciated!! Same for pointers to an Avid tech, particularly in the San Francisco Bay Area.
> > >
> > > Thanks!
> > > Roberto Miller
> > > roberto@
> > >
> >
>
>

[Non-text portions of this message have been removed]