> Then I tried to capture HDV. I cannot capture to Project settings of 1080 30p
> using Firewire (no surprise). With Format set to 1080/59.94i, the error is
> "Exception: An error has occurred while capturing". Again, no surprise.
> With Format set to 1080i/59.94 and Raster 1440x1080, it should work. While MC
> controls the camera to play and pause, when I click on V or A1/A2, it reports
> "No input signal present". The camera is set to "Auto" for HDV/DV;
> changing to HDV does not help. I've tried Autoconfigure from Generic Device
> and Sony HVR Z1U (A1U is not an option). I've tried disconnecting the
> Firewire storage drives. But still "No input signal present". What can I
> try next? I've searched for this problem and found others with similar
> problems but did not see solutions. Any help will be appreciated. David.
Is the recording format in the capture window set correctly. I often get
a DVCpro format that causes this error. Pop down the capture window
format selector and change it to HDV and all is good.
Hope this helps.
Marcus
No comments:
Post a Comment