option. No dice as well...
On Wed, Dec 28, 2011 at 4:35 PM, electropura212 <electropura212@gmail.com>wrote:
> **
>
>
> I know you are on AJA, but the Blackmagic manual for Avid has instructions
> for a setting to relax Coincindence Point detection. This may fix your
> problem. Give it a try.
>
> Capture from Controllable devices with UltraStudio, DeckLink and
> Multibridge
> If you have a deck which connects via RS-422, you will need to configure
> the deck settings before performing
> a capture.
> From your project window, click the Settings tab and double-click on Deck
> Configuration.
> In the Deck Configuration dialog box, click Add Channel and then set the
> Channel Type to Direct and the Port to RS-422 Deck Control. Click OK and
> choose "No" when asked, "Do you want to autoconfigure the channel now?"
> Click Add Deck and then select your brand and model of deck from the Device
> menus and also set the desired preroll. Click OK and then Apply.
> Under the Settings tab, double-click on Deck Preferences.
> If you plan to make assemble edits to tape, enable the option to "Allow
> assemble edit & crash record for digital cut". If this option is left
> unchecked, you will only be able to perform insert edits.
> Enable the option to "Relax coincidence point detection" and set other
> settings as needed. Click OK. You have completed setting up the RS-422
> connection to your deck.
>
> http://www.blackmagic-design.com/media/2445176/Desktop_Video_Manual.pdf
>
>
> On Wednesday, December 28, 2011, Mark Spano <cutandcover@gmail.com> wrote:
> > More testing:
> >
> > Tried insert edit on pre-striped tape - same error. Tried video only
> > sequence, same result.
> >
> > Tried assemble edit with deck set to reference input video - same error.
> >
> > At this point, I am officially declaring this operation broken. Hopefully
> > someone at Avid will respond to my trouble reports there.
> >
> > Thanks again for the suggestions guys.
> >
> > Mark
> >
> > On Wed, Dec 28, 2011 at 1:17 AM, johnrobmoore <bigfish@pacbell.net>
> wrote:
> >
> >> **
>
> >>
> >>
> >> What if you try an insert edit on a preblacked tape? Assemble should
> still
> >> work but for the sake of trouble shooting it might reveal more of the
> story.
> >>
> >>
> >> --- In Avid-L2@yahoogroups.com, Mark Spano <cutandcover@...> wrote:
> >> >
> >> > Finds preroll point just fine. Prerolls, then drops into record. Drops
> >> right out again, with error.
> >> >
> >> > More testing reveals:
> >> >
> >> > Same exact sequence performs flawless digital cut with same deck but
> >> from system with a Nitris DX, so I'm pretty sure it's a MC<->IO Express
> >> thing. All assemble edits, and this only happens with the Digi - tried
> an
> >> SR assemble edit with the IO Express and it went down fine.
> >> >
> >> > I'll try flipping the deck to input video ref instead to see if that
> >> helps.
> >> >
> >> > Maybe a better question now that I have a little more testing in is:
> >> anybody with an IO Express able to lay off to a digibeta?
> >> >
> >> > Thanks for the suggestions,
> >> > Mark
> >> >
> >> >
> >> > On Dec 27, 2011, at 4:15 PM, "johnrobmoore" <bigfish@...> wrote:
> >> >
> >> > > I usually get the coincidence point error when the deck is trying to
> >> find the preroll point. I think they changed the wording to include the
> >> possibility the tape or deck is record inhibited. Any chance of a
> drop/non
> >> drop mismatch? Are you insert or assemble editing? Could the deck be
> >> regenerating the wrong timecode df/nd when it goes into assemble edit?
> For
> >> giggles see if you can do a proper machine edit while feeding the deck
> the
> >> Avid signal.
> >> > >
> >> > > --- In Avid-L2@yahoogroups.com, "Mark Spano" <cutandcover@> wrote:
> >> > > >
> >> > > > Hi folks,
> >> > > >
> >> > > > Wonder if any of you have had this issue and how you got around
> it.
> >> I have a current issue Mac Pro running 10.6.8 and MC 5.5.3.1. Have just
> >> installed the IO Express and have the 9.0.5 drivers for it, and using a
> >> Keyspan adapter for serial control. Everything is working as expected in
> MC
> >> - proper video output, can change settings and lock to reference. But
> when
> >> I go to perform a Digital Cut to a Sony DVW-A500 DigiBeta deck, it
> >> prerolls, goes into record, and then drops right out. It gives me an
> error
> >> about trying to locate coincidence point on tape. I have checked this
> exact
> >> same setup with FCP on this system using the IO Express and Keyspan and
> >> everything goes off without a hitch. Just can't output to tape with MC.
> >> Hoping someone here has an idea.
> >> > > >
> >> > > > Thanks,
> >> > > > Mark
> >> > > >
> >> > >
> >> > >
> >> >
> >> >
> >> > [Non-text portions of this message have been removed]
> >> >
> >>
> >>
> >>
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
>
> >
> > Search the official Complete Avid-L archives at:
> http://archives.bengrosser.com/avid/
> > Yahoo! Groups Links
>
> >
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
>
>
[Non-text portions of this message have been removed]
------------------------------------
Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)
<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
No comments:
Post a Comment