Re: [Avid-L2] Q logic SanBox 5600 16 port fibre switch?

We have pushed several streams of DNxHD and ProRes (each stream is
roughly 1:1 SD) through the 5600 without problems. More often than not,
your problem is caused by a bad configuration somewhere down the line.

Check the firmware of your Sanbox. Make sure your FC cards are set
correctly (use Atto Config Tool if you are using Celerity cards) on both
the client and server side.

HTH

John Moore wrote:
> Just curious about the Q logic sanbox 5600 16 port fibre switch as video performance goes. The specs and lit say it's good for video. Having problems on a SanMP setup when I digital cut and someone else is capturing to a different drive in the array I get stalls on ouput about every 6 minutes. I don't know much about san components but the specs say it auto sensing up to 4.2Gb/sec. Sure seems like 2 SD 1:1 streams shouldn't choke the system but the Avid seems to get finicky when doing a digital cut while someone captures on another system on the SanMP. Just trying to learn a little more about what could be going on. I know SanMP is not ideal but it seems to have been configured properly so I don't have a clue what if anything has changed to cause this problem. Any suggestions would be appreciated.
>
>
> John Moore
>
> Barking Trout Productions
>
> Studio City, CA
>
> bigfish@pacbell.net
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Please donate to the Red Cross to help those in earthquake ravaged Haiti: http://www.redcross.org/en/donatemoney
>
> Search the offical complete Avid-L archives at: http://archives.bengrosser.com/avid/
>
> Yahoo! Groups Links
>
>
>
>
>

--
Dom Q. Silverio

------------------------------------

Please donate to the Red Cross to help those in earthquake ravaged Haiti: http://www.redcross.org/en/donatemoney

Search the offical complete Avid-L archives at: http://archives.bengrosser.com/avid/

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/