[Avid-L2] HDMI external monitor

So, what I've learned. Avid project type 1080p/23.976 DNxHD36.

Take HDMI out of the MojoDX to a Dell U2410. Works fine. Looks good.

Take HDMI out of the MojoDX to a Sony Bravia KDL-32L5000. Works under
certain conditions. I can change the CrossConvert setting on the
Video Output setting to 1800/59.94 and the monitor works. But Avid
will not support Digital Cut in that mode. So when it's time to do a
Digital Cut you have to go without a monitor. OR... You can change
the HDMI Color Space setting to RGB and the Bravia will then think
that it's looking at a computer source. You go into your settings and
switch the PC Settings - Wide Mode over to Full 2. And it looks
nice. But to get it to see the HDMI as a PC source you sometimes have
to cycle the power on the TV or switch off that input and then back to
it.

I suspect that the stations that do I/O are going to end up with Dell
monitors and the edit only workstations will use the Sony Bravia.

Jay

------------------------------------

Please donate to the Red Cross to help those in earthquake ravaged Haiti: http://www.redcross.org/en/donatemoney

Search the offical complete Avid-L archives at: http://archives.bengrosser.com/avid/

Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/