[Avid-L2] Re: mojo blanking

It's possible. It would help to know how fat the blanking is. I read specs to today that blanking was okay up to 12 microsecs. At ABC I was told 10.9 to 11.2. Just for giggles what would happen if you capture composite through the mojo? I know it's a bit of recabling the input but it might shed some light. Another thought would be to set the digibeta to internal color bars and capture it without time code and check the blanking on that. This should eliminate the source as the problem. It does sound like you already proved the source was okay by capturing SDI into the meridian but the bars signal might point to what's going on with the component input.

--- In Avid-L2@yahoogroups.com, Lou Wirth <loutv@...> wrote:
>
> I know about the paths and its not the best test but....Mojo is fed
> component from the digibeta and Meridien is fed sdi from same digi.
> same black source to all. So you are saying the component signal from
> the digibeta may be the problem and not the mojo.
>
>
> On Oct 29, 2009, at 4:18 PM, johnrobmoore wrote:
>
> > Those are two different signal paths. How are you feeding the
> > analogue mojo? Component or composite. Are the mojo and the digibeta
> > on the same black reference? IIRC you have an analogue mojo so from
> > what you posted the SDI is correct in blanking but the composie or
> > component might be off or how the mojo is interpreting its input
> > signal.
> >
> > --- In Avid-L2@yahoogroups.com, Lou Wirth <loutv@> wrote:
> > >
> > > It points to Mojo. Using digibeat, ran the same source material into
> > > the Meridien SDI and all is fine. I thought it was the Digi machine.
> > > Looking at source running though mojo and picture is shifted. Any
> > > other ideas what it could be?
> > >
> > > Lou
> > > On Oct 29, 2009, at 3:28 PM, Wilson Chao wrote:
> > >
> > > > Are you sure the Mojo is the problem, rather than the source
> > material?
> > > >
> > > > On Thu, Oct 29, 2009 at 5:56 PM, Lou Wirth <loutv@>
> > > > wrote:
> > > > > I have an analogue Mojo with a blanking problem according to my
> > > > > engineer. I assume nothing can be done here or is there a
> > software
> > > > > fix for this?
> > > > > Time to upgrade this box.
> > > >
> > > >
> > >
> > > Lou Wirth Productions
> > > 500Tamal Plaza, Suite 522
> > > Corte Madera, CA 94925
> > > www.louwirth.com
> > > 415-924-9411p
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
>
> Lou Wirth Productions
> 500Tamal Plaza, Suite 522
> Corte Madera, CA 94925
> www.louwirth.com
> 415-924-9411p
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

------------------------------------

Search the offical complete Avid-L archives at:

http://archives.bengrosser.com/avid/

Avid L2, Where the Answers are.Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
mailto:Avid-L2-digest@yahoogroups.com
mailto:Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/